Health O Meter 2650KL operation manual Tare Weight, Data Management, Removing the Tare

Page 11

OPERATION INSTRUCTIONS

02TARE WEIGHT

NOTE: Due to the scale’s sensitivity, we recommend using the REWEIGH function prior to setting the TARE weight, in order to eliminate any operator interference with the item to be tared out.

There are two ways to manually enter a tare weight (such as the weight of a wheelchair, shoes, etc): press MENU (1) and select option 02-Tare Weight or press TARE (9). If there is no weight on the scale platform (value displayed is zero and there is no tare) and the user presses the TARE button (9), the Tare Weight window appears and prompts the user to enter the TARE value and to press ENTER. NOTE: The tare weight must be entered using the following increments: 4oz, 0.2lb, ¼lb. The value entered will display in minus (-). After the TARE has been entered, the scale goes back to normal operation. This TARE value is stored in memory until changed or cleared.

Important: The TARE weight cannot exceed 200 lb.

The number that is to be changed will flash and will move from the left to the right after the appropriate number was entered or by using the c key (left) and the d key (right).

TARE display indicates the weight that has been tared out

Figure 9. Tare Weight

Automatic Tare

The user can set a tare weight by pressing the TARE button (9) while there is a weight on the scale platform. The display will come to zero and TARE will be displayed to indicate there is a tare value in the memory (as displayed in Figure 9 above).

Removing the Tare

Additional pressing of the TARE button will delete the tare value from memory, TARE will disappear from the display and the scale will resume normal operation.

03DATA MANAGEMENT

The scale manages patient data including patient ID, weight, height, tare and BMI. The value is stored in memory or transferred to PC. This function is performed by opening a new data file.

OPENING A NEW DATA FILE:

1.Press the ID button (7).

2.Using the keypad, type in the identification number.

3.Press ENTER.

This scale will also calculate Body Mass Index (BMI).

CALCULATING BMI:

1.Place the patient on the scale platform.

2.Press the BMI button (2).

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PRO Plustm Electronic Wheelchair Scale Table of Contents General SpecificationsScale Specifications Assembly after Shipment Assembly InstructionsRefer to the Parts List on page 22 for details on parts Folded Ramp Replacing Batteries SET UPPreparing the Scale for Use Operation Instructions Description Function Only applies to pound values, not the metric values Weight Display ModeMenu Removing the Tare Tare WeightData Management Enter Scale Settings Operation Instructions System Settings System Test User Settings Operation Instructions Disconnect the scale from the AC power source MaintenanceMaintenance CleaningSymptom Possible Cause TroubleshootingOperator Action Display Display AssemblyCalibration Path Exploded View of Scale Scale Platform and Ramps CAT No Parts ListTo get Warranty Service WarrantyLimited Warranty What does the Warranty Cover?Table DES Matieres Generalites Precaution ET PreventionSpecifications DE LA Balance Montage après envoi Mode DassemblageMode Dassemblage Pliage de la rampes daccès Préparation de la balance avant usage InstallationRemplacement des piles Mode DE Fonctionnement Touche Description Fonction Menu Principal Mode Daffichage DU PoidsRetrait de la Tare Poids DE LA TareGestion DES Donnees Mode DE Fonctionnement Reglages DE LA Balance Mode DE Fonctionnement Reglages DU Systeme Test DE Systeme Reglages Utilisateur Mode DE Fonctionnement Déconnectez la balance du secteur CA NettoyageLocalisation DES Pannes Symptome Cause Possible Action CorrectiveAction réalisée par lopérateur Message affiché CalibragePage Liste DES Pieces Garantie Pour obtenir un service de garantieÍndice Especificaciones DE LA Balanza Precaución Y AdvertenciaEspecificaciones Figura 1. Montaje Después del Envío Instrucciones DE MontajeFigura Figura 3. Moviendo la Rampa Cambiando las Baterías ConfiguraciónPreparando la Balanza para ser Usada Instrucciones DE Operación Ítem Descripción Función Modo DE Presentación DEL Peso MenúRemoviendo la Tara Administración DE DatosPeso Tara Tara AutomáticaCalculando EL BMI Configuraciones DE LA Balanza Instrucciones DE Operación Configuraciones DEL Sistema Prueba DEL Sistema Configuraciones DEL Usuario Instrucciones DE Operación Desconecte la balanza de la fuente de energía CA MantenimientoMantenimiento LimpiezaSíntoma Posible Causa Acción Correctiva Solución DE ProblemasAcción del Operador Display Trayectoria DE CalibraciónPage Lista DE Partes ¿Qué Cubre la Garantía? GarantíaGarantía Limitada AA0367-0 August
Top Page Image Contents