Invacare User guide Installing / Removing or Adjusting Trunk Supports if fitted, Removal Tube

Page 49

7.5Installing / Removing or Adjusting Trunk Supports (if fitted)

CAUTION:

After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result..

Installing

1.Ensure the trunk support fixing screws are loose.

2.Slide the trunk support clamp over the fixing tube and hold at the desired position.

3.Tighten the trunk support fixing screws using a hex wrench.

Removal

Tube

1. Loosen the trunk support fixing screws using a hex wrench and remove the trunk support assembly.

Adjusting

1.The trunk support height can be adjusted by loosening the fixing screws and sliding the trunk support to the desired location.

2.To adjust the trunk support position laterally, remove the upholstered pad which is fixed using hook and eye fasteners.

Clamping

screws

Clamp

Fixing screws

49

Image 49
Contents InvacareSpectra BlitzTM ISO 7176 Part Standard Invacare Terms Warranty terms & conditionsLimitation of liability United Kingdom Contacting InvacareFrance GermanySverge & Suomi NetherlandsSpain ItalyContents Armrests Batteries Transportation Technical Specifications Label locations Dear User IntroductionIntended Use Requirements Important symbols in this manualType Classification and Area of Use General Safety Notes Repair or Service InformationGeneral Warnings Batteries Tyre PressureElectrical Weight Limitation Weight TrainingRain Test Safety Information on Electromagnetic Interference Important Warning Safety Precautions/Safe OperationCoping with Everyday Obstacles Safety IndoorsAmputee Statement for Prescribers SAFETY/HANDLING of WheelchairsRecommended Driving Position Surfaces Affected by Heat Stability and Balance Some Useful TipsReaching Bending Backwards Reaching Bending ForwardTransferring to and from Other Seats Negotiating Kerbs Negotiating GRADIENTS/SLOPESSafeguarding Others YOU,YOUR Powerchair and OthersGeneral Safety Inspection ChecklistMotor brushes & motor gearbox coupling Clothing guards ArmsDrive wheels Seat and back upholsteryCastors Castor/wheel/fork/head tubeCleaning Troubleshooting Mechanical Troubleshooting Electrical Symptom Probable Cause Solutions Checking Battery Charge Level Cleaning the vehicle Care and maintenanceProduct End of Life Installing / Removing Legrests Legrest MaintenanceRemoving Legrest height adjustmentAdjusting Angle Adjustable Flip-up Footplates Adjusting Adjusting / Replacing Foot Plate Heel Strap if fittedReplacing Installing Installing/Removing ArmrestsArmrests Removal handwheel Height Adjustment Adjusting the ArmrestsArmpad Adjustment Armrest Width Adjustment Backrest Adjusting Backrest AngleAdjusting Backboard Position Adjusting Backpost Support Bracket Removal Installing / Removing or Adjusting Headrest if fittedPage Removal Tube Installing / Removing or Adjusting Trunk Supports if fittedSwing away function Adjusting Tension Adjustable Back Upholstery if fitted Installing / Removing Installing / Removing Back CushionAdjusting Push Handles Installing/Removing Installing / Removing Seat CushionSeating Lapbelt Adjusting Seat WidthSeat Frame Adjustment Adjusting Seat DepthSeat Board Adjustment Adjusting Seat Angle Installing / Removing Seat boardElectrical Adjustment of Seat Angle Anti Tipping Castors Batteries Removing/Installing BatteriesRemoving Front Battery Negative Positive + Installing Page Important Warnings Batteries and battery chargingBatteries When to Charge To Charge Batteries Charging ProceduresDisposing and Recycling of Used Batteries Disengaging/Engaging Motor Lock Levers Motor locks, Wheels and BrakesAdjusting Front Castors Inflation Drive WheelsTo Activate Brake Manual Parking BrakesTo De-Activate Brake Types of User Controller Controls and operating your powerchairFreewheel Operation see Shark OperationHorn Button Shark Controller FunctionsLock Function Unlock FunctionActuator Adjustment Adjusting Driving SpeedUsing the Speedometer Battery GaugeDisplay This means 12.4 REM24SD OperationPilot + Operation Pilot + Controller Functions Mode ButtonSystem Status Indication VSI Operation VSI Controller Functions Unlock Function Display This means Types of Attendant Controller Driving practiceACS Dual Control Operation Pilot + Dual Control Operation Pilot + Attendant Control Pilot + Attendant Controller Functions Display This means User Joystick Mounting Hardware AdjustmentFixed Joystick Mounting Arm Installing / Removal Transportation Page Page Technical Specifications B.A.* Back Angle Adjustment B.A.* Seat Angle AdjustmentOperatingTemperature StorageTemperatureFlammability Label Upholstery Label locations1484781