Invacare User guide manual Adjusting Backboard Position

4.Adjust backrest to desired angle.

5.Re-fit the handwheels to the available holes in the backrest. Hand tighten only.

6.Re-fit safety “R” clip.

7.Repeat steps 5 and 6 for opposite side.

7.2Adjusting Backboard Position

WARNING

•This adjustment should only be performed when the wheelchair is unoccupied.

•Take care not to damage any accessories fitted to the backrest.

The backboard can be adjusted both in height and width (see section 8 Seating). This can be useful if another type of back cushion is to be fitted.

1.Remove the four fixing screws using a cross point screwdriver.

2.Reposition the backboard.

3.Replace and tighten the four fixing screws.

NOTE:

Ensure the backboard is firmly secured before fitting the cushion or using the wheelchair.

45