Invacare Tracer EXIR manual Installing the Seat Positioning Strap Figure, Options Section

Page 41

OPTIONS

SECTION 10

 

 

 

Section 10 - Options includes the following:

Installing the Seat Positioning Strap

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attach- ing hardware is tightened securely - otherwise injury or damage may occur.

INSTALLING THE SEAT POSITIONING STRAP (FIGURE 1)

WARNING

ALWAYS wear your positioning strap. Inasmuch as the SEAT POSI- TIONING STRAP is an option on this wheelchair (You may order with or without the seat restraint), Invacare strongly recommends ordering the SEAT POSITIONING STRAP as an additional safeguard for the wheel- chair user.

1.Remove the bottom back upholstery screw from the wheelchair.

2.Position the seat positioning strap half between the back cane and back upholstery.

3.Secure the back upholstery and seat positioning strap to the wheelchair with the existing back upholstery screw.

4.Repeat STEPS 1-3 for the opposite side of the wheelchair.

Back

 

 

Upholstery

 

Back Upholstery

Screw

Back Cane

 

 

Seat Positioning Strap

FIGURE 1 - INSTALLING THE SEAT POSITIONING STRAP

OPTIONS

Part No. 1110547

41

Tracer® EXI

Image 41
Contents Tracer R EXI Tracer EXI Table of Contents ANTI-TIPPERS/WHEEL Locks Special Notes Special NotesLabel Locations LocationslabelSpecifications SpecificationsSection General Guidelines Stability ALL ModelsGeneral Guidelines General Guidelines Section Operating InformationTire Pressure Weight TrainingWeight Limitation Coping with Everyday Obstacles SAFETY/HANDLING of WheelchairsStability and Balance Percentage of Weight Distribution Do not tip the wheelchair without assistance TippingMethod 2 Wheelchair Without Step Tube Method 1 Wheelchair with Step TubesTipping Curbs Method 2 Wheelchair Without Step Tube ESCALATORS? Sorry StairwaysUnfolding and Folding the Wheelchair Transferring to and from Other SeatsUnfolding Folding FoldingSection Safety Inspection Safety Inspection ChecklistSafety Inspection Maintenance TroubleshootingMaintenance Safety Precautions Suggested Maintenance ProceduresSafety Inspection Installing INSTALLING/REMOVING the Front Riggings FigureRemoving Front Riggings SectionSpring Button Height Adjustment Figure Footplate Height AdjustmentBOLT-IN-PLACE Height Adjustment Figure RiggingsOutside of Swingaway Front Rigging Fixed Frame FigureHeel Loop Replacement Figure RAISING/LOWERING the Elevating Legrest Assembly FigureInside Outside Swingaway Front Rigging Detail a Footplates with BOLT-IN-PLACESpring Buttons Footplates Installing Armrest Removing and Installing Armrest FigureRemoving Armrest ArmsReplacing Seat Upholstery Figure Replacing Back Upholstery FigureSeat and Back Section Seat and BackEXI with Swingaway Front Riggings Figure Adjusting the Seat WidthSeat Backand Section Seat and BackCrossbrace Hardware DetailDetail B Removing Upper Mounting Hardware EXI with Fixed Frame FigureDetail a Removing Lower Mounting Hardware Permanent Axles Figure REMOVING/INSTALLING the Rear WheelsRear Wheels Section Rear WheelsReplacing Rear Wheel Handrim Figure REPLACING/REPAIRING Rear Wheel TIRE/TUBESection Rear Wheels WheelsrearAdjusting Forks Figure INSTALLING/REPLACING Fork Assemblies FigureFront Casters Section Front CastersReplacing Front Casters Figure REPLACING/REPAIRING Front Caster TIRE/TUBECastersfront Section Front CastersInstalling the ANTI-TIPPERS Figures 1 INSTALLING/ADJUSTING the ANTI-TIPPERSANTI-TIPPERS/WHEEL Locks Section ANTI-TIPPERS/WHEEL LocksSection ANTI-TIPPERS/WHEEL Locks Adjusting the ANTI-TIPPERS FigureLOCKSTIPPERS/WHEEL AntiAdjusting the Disk Wheel Locks Figure USING/ADJUSTING the Disk Wheel LocksUsing the Patient Operated Disk Wheel Locks Figure Locks Installing Wheel Lock Shoe Extensions FigureSEAT-TO-FLOOR Height Changing SEAT-TO-FLOOR Height FigureSEAT-TO-FLOOR Height Section Changing SEAT-TO-FLOOR Height Options Installing the Seat Positioning Strap FigureOptions Section Tracer EXI Warranty WarrantyCanada Made in Mexico