Invacare Pro Series manual Replacing Seat Upholstery Figure, Back Upholstery, H O L S T E R Y

Page 19

UPHOLSTERY	PROCEDURE 2

This Procedure includes the following:

Replacing Seat Upholstery

Back Upholstery

Installing Fabric Clothing Guards

WARNING

After adjustments and BEFORE use, make sure all attaching hardware is securely tightened, otherwise injury or damage may occur.

REPLACING SEAT UPHOLSTERY (FIGURE 1)

1.Remove the seat cushion, if necessary, from the wheelchair.

2.Remove the twelve (12) phillips screws that se- cure the existing seat upholstery to the seat frame.

3.Remove the existing seat upholstery.

4.Install the new seat upholstery by reversing STEPS 1-3.

BACK UPHOLSTERY

Removing/Installing Optional Back Upholstery - Back Canes with Push Handles (FIGURE 2)

REMOVING.

1.Cut the tie-wraps that secure the bottom of the exist- ing back upholstery to the wheelchair frame.

2.Remove the two (2) phillips screws and washers that secure the existing back upholstery to the back canes.

3.Remove the allen screw and locknut that secure one

(1) back cane to the wheelchair frame.

NOTE: It is necessary to remove only one (1) back cane to replace the back upholstery.

4.Pull the loose back cane out of the existing back up- holstery.

5.Pull the existing back upholstery up and over the mounted back cane.

6.Install the new upholstery onto the wheelchair. Refer to the following procedure.

U P H O L S T E R Y

5.If necessary, reinstall the seat cushion onto the wheelchair.

Fastening Straps

Seat

Upholstery

Phillips

Screws

FIGURE 1 - REPLACING SEAT UPHOLSTERY

INSTALLING.

1.Position the new back upholstery over the mounted back cane.

2.Slide the new back upholstery over the mounted back cane.

3.Slide the loose back cane through the new back up- holstery.

4.Using the mounted back cane as a guide, reinstall the loose back cane to the wheelchair frame with the ex- isting allen screw and locknut.

Back Upholstery

Washer

Phillips	Washer
Screw

Tie Wrap

Phillips ScrewMounting

Hole

FIGURE 2 - BACK UPHOLSTERY -

REMOVING/INSTALLING OPTIONAL BACK UPHOLSTERY - BACK CANES WITH PUSH HANDLES

1 9

Image 19

Contents Pro Pro-T Page Table of Contents Special Notes Special NotesSafety Summary Safety SummaryTire Pressure SAFETY/HANDLING of Wheelchairs Method StairwaysTransferring to and from Percentage of Weight DistributionOther Seats REACHING, LEANING, Bending and Bending Forward Functional Reach from a WheelchairREACHING, Bending Backwards Specifications SpecificationsSafety Inspection Check List Safety Inspection ChecklistTROUBLESHOOTING/MAINTENANCE TroubleshootingMaintenance Maintenance Safety PrecautionsProcedure Footrest INSTALLING/REMOVING Footrests FigureAdjusting Footrest Height Figure Installing Adjustable Angle FLIP-UP Footplate Hinge FigureFlip the footplate hinge to the UP position Footrest ProcedureInstalling Adjustable Angle Flip-up Footplate Adjustable Angle Flip-up Footplate Depth AdjustmentImpact GUARDS/CALF Strap Figure Replacing Heel Loops FigureComposite Footplates Release Lever Calfpad Adjust Calfpad Secure Calfpad INSTALLING/REMOVING Elevating Legrests FigureAdjustable Footplate Adjusting CalfpadsWashers Basketball Roller Tube Installing Basketball Roller FigureSaddle Bolts Footrest Coved Washers Basketball Roller LocknutsH O L S T E R Y Upholstery ProcedureReplacing Seat Upholstery Figure Back UpholsteryBack canes AdjustingAdjustable Tension Back Upholstery Installing Adjustable Tension Back Upholstery FigureUpholstery Replacing Adjustable Tension Back Upholstery FigureAdjustable Tension Straps H O L S TWHY USE Adjustable Tension Back Fabric Clothing Installing Fabric Clothing Guards FigureGuard FOLDING/UNFOLDING Back Folding Back Wheelchairs only Figure Adjusting Back Height FigureProcedure Frame M EBack Canes With Push Handles Adjusting Rear Seat Height FigureAdjusting Back Angle Folding Back Wheelchairs only Figure Frame ProcedureBack Angle to Seat Rail Reinstall the washer and locknut onto the bottom hex screw Installing Half ARM FigureAdjusting Half ARM Height Figure Arms ProcedureInstalling Installing the T-ARM Sockets FigureINSTALLING/REMOVING the T-ARMS Figure Procedure ArmsDepth Figure Adjusting the T-ARMSWidth Figure Height FigureArm Sockets Figure Reposition the arm tube on the T-arm postArm Clamp Arm Socket Bottom Socket Screws Replacing the Locking Lever T-ARMS FigureHeight Installing Flip Back Arms FigureAdjusting Flip Back Arms Figure LengthGuard Slot Installing Rigid Clothing Guards FigureThreaded Half Clamp S T E R S REPAIRING/REPLACING Pneumatic Caster TIRE/TUBEINSTALLING/REPLACING Front Caster Forks Figure Procedure CastersPro-SA Model Wheelchairs Figure Adjusting Front Caster HeadtubesALL Pro Series Wheelchairs Except Pro-SA Figure Adjusting Caster Headtube Height Pro-SA Wheelchairs OnlyRepositioning Caster Headtubes on Wheelchair Frame Figure Repeat Steps 1-8for the opposite side of the wheel- chairALL PRO Series Wheelchairs Except PRO-SA Casters ProcedureProcedure For Repositioning the Front Caster Headtubes PRO-SARepeat Steps 1-4for the opposite side of the wheel- chair Installing QUICK-RELEASE Casters FigureSpacer Caster Headtube Fork Stem Locknut Bolt Front Caster Adjusting QUICK-RELEASE Axles Figure REMOVING/INSTALLING Rear Wheels FigureRear Wheels Procedure And/or Out Installing QUAD-RELEASE Axles FigureAdjusting QUAD-RELEASE Handles Figure Procedure Rear WheelsRemoving the Play From the Rear Wheels REPAIRING/REPLACING Pneumatic Rear Wheel TIRE/ TubeAdjusting Wheelbase Length Figure Adjusting Wheelbase Width FigureWheelchair Three 3 Camber Frame Washers Adjusting Rear Wheel Camber FigureJam Nuts Axle Mounting Plate Axle Bushing Washer Coved Axle Washers Mounting Locknut Plate OneToe-out Toe-in Smaller Than Front Larger Than Front TOE-IN/TOE-OUT Alignment Figures 8Rear Wheelchair Centerline Conditions existsE E L S REPLACING/ADJUSTING the Wheel Lock FigureCorrecting TOE-IN/TOE-OUT Condition FigureInstalling the Anti-tippers Wheel Lock Extension Handle Installation FigureINSTALLING/ADJUSTING the ANTI-TIPPERS Figure Adjusting the High/Undermount Wheel LockWheelchair Frame Anti-tipper Adjusting the Anti-tipper HeightAdjust HeightPhillips Screw Handrim Installing/Replacing Handrims Spoke Rear Wheels FigureAdjusting Handrims Spoke Rear Wheels Figure HandrimsComposite Rim Locknut Phillips Screw Rear Wheel HandrimLink Seat to Floor Height Determination Figures 1 Seat to Floor ProcedurePositioning Caster Headtubes on the Wheelchair Frame Changing Seat to Floor HeightPositioning Front Caster on the Fork Rear Seat to Floor Heights Caster Headtube Front Seat to Floor Heights PRO-SA only Seat to FloorprocedurePage Warranty Limited WarrantyA N T Y One Invacare Way