Camera operation setting Camera Setup | Panasonic WV-CP304 manual

Camera operation setting [CAMERA SETUP]

The following settings related to camera actions can be configured on the "CAMERA SETUP" screen displayed from the top screen. Refer to page 5-6 for how to call up the screen.

The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.

1 Register a scene file [SCENE1/SCENE2]

It is possible to register 2 patterns of scene file. When different settings are to be applied between day and night, SCENE1 can be applied in the daytime and SCENE2 at night. Change between the scene files can be made by shortcut operation. ( page 27) "SCENE1" is set as the default setting.

Screen when "SCENE1" is selected			Screen when "SCENE2" is selected
	CAMERA SETUP			**CAMERA	SETUP**
	SCENE1	ALC		SCENE2	ALC
	ALC/ELC			ALC/ELC
	SHUTTER	OFF		SHUTTER	OFF
	AGC	ON(HIGH)		AGC	ON(HIGH)
	SENS UP	OFF		SENS UP	OFF
	WHITE BAL	ATW1		WHITE BAL	ATW1
	DNR	HIGH		DNR	HIGH
	D&N(IR)	AUTO1		D&N(IR)	AUTO1
	VMD	OFF		VMD	OFF
	RET TOP END			COPY(SCENE1)
				RET TOP END

Step 1

After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through "VMD". ( page 11-19)

To change the scene files, go to step 2.

Step 2

Move the cursor to "SCENE1" and use the [right] or [left] button to select "SCENE2".

→The screen changes and displays “SCENE2”.

Step 3

To configure the settings of "SCENE2" using the settings of "SCENE1", press the [SET] button after moving the cursor to "COPY(SCENE1)".

→The settings of "SCENE1" will be copied to "SCENE2".

Step 4

Edit the settings to be changed.

The number displayed at the right side of the title on each setting screen indicates a scene file number.

	ALC CONT(1)		Scene file
BLC	BACK LIGHT COMP		number
BLC		OFF
ABS		ON

Step 5

Move the cursor to "SCENE2" and press the [right] or [left] button to select "SCENE1" to resume normal operation.

MASK	SET
LEVEL	.I..... 0
	-	+
RET	TOP END