Screenshot 3
The selected setup screen in the setup menu appears on the screen.
**CAMERA | SETUP** | |||||||
SCENE1 |
| ALC |
|
|
|
|
|
|
ALC/ELC |
|
|
|
|
|
|
| |
|
| |||||||
|
| |||||||
SHUTTER | OFF | |||||||
AGC | ON(HIGH) | |||||||
SENS UP | OFF | |||||||
WHITE BAL | ATW1 |
|
|
|
| |||
| ||||||||
| ||||||||
DNR | HIGH | |||||||
D&N(IR) | AUTO1 |
|
| |||||
| ||||||||
| ||||||||
VMD | OFF | |||||||
RET TOP END |
|
|
|
|
|
|
| |
Note:
•If the top screen of the setup menu is called up with the operation buttons while the camera is operated, the setup mode is always "DISABLE" to prevent operation errors.
To perform settings in the setup menu, change the setup mode to "ENABLE".
•The cursor is a reversely highlighted part.
Step 4
Perform the settings for each item.
•Selection of setting item:
Press the [up] button or [down] button to move the cursor.
•Change of settings:
Press the [right] button or [left] button.
•Display of advanced setup screen:
Press the [SET] button when “
” is attached to the target setting item.
•Return to previous setup screen:
Move the cursor to "RET" and press the [SET] button.
•Return to the top screen:
Move the cursor to "TOP" and press the [SET] button, to display the top screen of the setup menu.
Step 5
Move the cursor to “END” and press the [SET] button to return to the camera image screen, or wait about 5 minutes and the setup menu will automatically close.
6