Panasonic WV-CP314, WV-CP310, WV-CP304, WV-CP300 Electronic sensitivity enhancement setting Sens UP

Page 13

Note:

• When "SENS UP" is set to the AUTO mode, “AGC” cannot be set to “OFF”.

5 Electronic sensitivity enhancement setting [SENS UP]

Use of the electronic sensitivity enhancement function increases the light sensitivity of the CCD, and accordingly the image becomes brighter. The magnification is unchanged for selec- tion of FIX, and the magnification is automatically adjusted in accordance with the illuminance of a photographic subject for selection of AUTO. The magnification of the electronic sensitivity is selectable from the following.

OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16 AUTO/X32 AUTO/OFF/X2 FIX/X4 FIX/X6 FIX/X10 FIX/X16 FIX/X32 FIX/X64 FIX/X128 FIX/X256 FIX/X512 FIX

Note:

When "ALC/ELC" is set to "ELC" or "ALC+", only the AUTO mode is enabled.

When "SHUTTER" is set to options other than "OFF", the electronic sensitivity enhance- ment setting cannot be performed and "---" appears.

When the magnification of "SENS UP" is increased, the screen becomes coarser, more whitish, or more flawed. However, this phenomenon is normal.

6 White balance setting [WHITE BAL]

The white balance adjustment is selectable from the following.

ATW1 (default): Activates the automatic color temperature tracking mode.

The camera continuously check the color temperature of the light source and automatically adjusts the white balance. The adjustment of the color tempera- ture ranges from approx. 2,700 K to 6,000 K.

ATW2: Activates the sodium lamp automatic color temperature tracking mode. The camera automatically achieves an optimal white balance under the sodium lamp. The adjust- ment of the color temperature ranges from approx. 2,000 K to 6,000 K.

If the situation meets one of the followings, color may not be accurately reproduced.

The subject is mostly highly-colored.

The photographic scene is under the bright blue sky or at nightfall.

The illumination of the light illuminating the subject is insufficient.

When "AWC" is selected, follow the steps below to adjust the white balance.

"CAMERA SETUP" screen

**CAMERA SETUP**

SCENE1

 

 

 

 

 

ALC/ELC

ALC

 

 

 

 

 

 

SHUTTER

OFF

AGC

ON(HIGH)

SENS UP

OFF

WHITE BAL

ATW1

 

 

DNR

HIGH

 

 

D&N(IR)

AUTO1

 

 

 

 

VMD

OFF

RET TOP END

 

 

 

 

 

13

Image 13
Contents Model No WV-CP310, WV-CP314 WV-CP300, WV-CP304 Trademarks and registered trademarks PrefaceContents List of setup menu About the setup menusStep Basic operationCamera Setup SCENE1 ALC Camera ID screen Screen transition diagram CP310Screen transition diagram CP300 Character entry Camera title setting Camera IDRegister a scene file SCENE1/SCENE2 Camera operation setting Camera SetupBack light compensation function Light quantity control method selection ALC/ELCGain control setting AGC Electronic shutter setting ShutterWhite balance setting White BAL Electronic sensitivity enhancement setting Sens UPArea setting screen Manual fine adjustment of white balanceBlack-and-white mode settingD&N IR CP310 D&N ELE CP300 Digital noise reduction function setting DNRCP310 Set motion detection VMD setting VMDMotion DET screen Display Mode screen Setting of scene change detection Privacy zone setting Privacy Zone Camera system setting System Setup@ Synchronization method selection Sync Electronic zoom setting EL-ZOOM Image stabilizer setting StabilizerLens distortion correction LDC Upside-down setting UPSIDE-DOWNChroma level adjustment Chroma Gain Special menu setting Special SetupAperture level adjustment AP Gain Pedestal level adjustment PedestalFlaw compensation PIX OFF Communication setting CommunicationSerial number viewing SER.NO Default resetting Camera ResetLanguage Setup screen Camera language selection Language SetupShortcut operation System controller operation Setting contentsPanasonic Canada Inc