Camera title setting [CAMERA ID]
This item specified the camera title. The camera title is named with up to 8 characters when using only Chinese characters, and up to 16 characters when using only English letters or num- bers. Chinese character, English letters and numbers can be used together. The "CAMERA ID" display can be turned on or off on the monitor screen.
Top screen | "CAMERA ID" screen | Display positioning screen | |||||||||
MODEL |
| **CAMERA ID** |
|
|
|
|
| ||||
CAMERA ID |
| ON |
|
| 0 | 123456789 |
| FLOOR |
| 1 |
|
CAMERA |
|
|
|
|
| ABCDEFGHIJKLM |
|
|
|
|
|
SYSTEM |
|
|
|
| NOPQRSTUVWXYZ |
|
|
|
|
| |
SPECIAL |
|
|
| ().,'":;&#!?= |
|
|
|
|
| ||
LANGUAGE |
|
|
|
|
|
|
|
| |||
SPACE POSI
RET TOP END RESET
END SETUP ENABLE................
Editing area
Step 1
Select "ON" for "CAMERA ID", and then press the [SET] button.
→The "CAMERA ID" appears.
Important:
•When "CAMERA ID" is set to "OFF", the camera title does not appear even after setting the camera title.
Step 2
Move the cursor to the target item with use of the [UP], [DOWN], [RIGHT], and [LEFT] buttons, and press the [SET] button to enter the character.
→The entered characters are displayed in the editing area.
<Character entry>
•To input English letters and numbers, move the cursor to the desired letter or number and press the [SET] button, to display the screen after enter of English letters and numbers.
•To revise a character, move the cursor to (↑) in the editing area, then move the cursor (↑) to an incorrect character with use of the right or left button, and enter a correct character.
•To enter a blank, move the cursor to "SPACE" and press the [SET] button.
•To delete all the entered characters, move the cursor to "RESET" and press the [SET] button.
Step 3
Move the cursor to "POSI" and press the [SET] button after title entered.
→The display positioning screen appears.
Step 4
Use the [UP], [DOWN], [RIGHT], and [LEFT] buttons to decide the title position and press the [SET] button.
→The title position is specified.
9