Panasonic WV-CP310, WV-CP314, WV-CP304, WV-CP300 About the setup menus, List of setup menu

Page 4

About the setup menus

Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area.

List of setup menu

		Setup item		Description

				This item specifies the camera title. The camera title that indicates the camera
		CAMERA ID		location and other information about the camera is created with alphanumeric
				characters and symbol, and then displayed on the screen.
		CAMERA		Performs the camera operation settings.

			SCENE 1/	Selects a scene file. It is possible to register and save the settings as a scene file
			SCENE 1/
			SCENE 2	in case that it is necessary to change the settings such when shooting at night.
			ALC/ELC	Selects the method of controlling the quantity of light in accordance with the lens
			ALC/ELC	to be used.
				to be used.
			SHUTTER	Specifies the electronic shutter speed.
			AGC	Specifies gain adjustment.
			SENS UP	Specifies electronic sensitivity enhancement.
			WHITE BAL	Specifies white balance adjustment.
			DNR	Selects the level of the digital noise reduction function.
			D&N (IR/ELE)	Performs each setting regarding the black-and-white mode such as switching
				between color and black-and-white images.
			VMD	Performs settings regarding VMD (Video Motion Detection)
			VMD	Performs settings regarding VMD (Video Motion Detection)
		SYSTEM		Performs the settings regarding the camera system such as synchronization and
		SYSTEM		privacy zone.
				privacy zone.
			SYNC	Specities the synchronization type.
			PRIVACY ZONE	Hides undesired portions in the camera shooting area.
			PRIVACY ZONE	Hides undesired portions in the camera shooting area.
			STABILIZER	Decides whether or not to enable the image stabilizer.
			EL-ZOOM	Switches the electronic zoom on and off.
			UPSIDE-DOWN	Flips the camera images vertically or horizontally.
			LDC	Adjusts the lens distortion correction to convert the image so that it matches the
			LDC	square monitor.
				square monitor.

		SPECIAL
			CHROMA GAIN	Adjusts the chroma level (color density).
			CHROMA GAIN	Adjusts the chroma level (color density).
			AP GAIN	Adjusts the aperture level.
			PEDESTAL	Adjusts the pedestal (brightness) level.
			HUE	Adjust the chroma phase (hue).

			PIX OFF	Corrects image defects such as flaws.
			COMMUNICATION	Performs the communication setting of the system with a receiver into which this
			COMMUNICATION	unit is integrated.
			CAMERA	Restores the settings in the setup menu to the default settings.
			CAMERA
			RESET
			RESET
			SER.NO.	Displays the serial number of this unit.
		LANGUAGE		Selects a language to be used in the setup menu.

4

Image 4

Contents Model No WV-CP310, WV-CP314 WV-CP300, WV-CP304 Preface Trademarks and registered trademarksContents About the setup menus List of setup menuBasic operation StepCamera Setup SCENE1 ALC Screen transition diagram CP310 Camera ID screenScreen transition diagram CP300 Camera title setting Camera ID Character entryCamera operation setting Camera Setup Register a scene file SCENE1/SCENE2Light quantity control method selection ALC/ELC Back light compensation functionElectronic shutter setting Shutter Gain control setting AGCElectronic sensitivity enhancement setting Sens UP White balance setting White BALManual fine adjustment of white balance Area setting screenDigital noise reduction function setting DNR Black-and-white mode settingD&N IR CP310 D&N ELE CP300CP310 VMD setting VMD Set motion detectionMotion DET screen Display Mode screen Setting of scene change detection Privacy zone setting Privacy Zone Camera system setting System Setup@ Synchronization method selection Sync Image stabilizer setting Stabilizer Electronic zoom setting EL-ZOOMUpside-down setting UPSIDE-DOWN Lens distortion correction LDCSpecial menu setting Special Setup Chroma level adjustment Chroma GainAperture level adjustment AP Gain Pedestal level adjustment PedestalCommunication setting Communication Flaw compensation PIX OFFDefault resetting Camera Reset Serial number viewing SER.NOCamera language selection Language Setup Language Setup screenSystem controller operation Setting contents Shortcut operationPanasonic Canada Inc