Digital noise reduction function setting DNR

Step 4

Move the cursor to "POSITION" and press the [SET] button.

Step 5

Press the [up], [down], [right] and [left] buttons to move to the upper-left part of the area to be set, and press the [SET] button.

Step 6

Press the [up], [down], [right] and [left] buttons to move to the lower-right part of the area to be set, and press the [SET] button.

7 Digital noise reduction function setting [DNR]

The digital noise reduction function reduces noise automatically under the condition of low illu- minance.

The effect level of the noise reduction function is selectable from the following. LOW: Low level of noise reduction (small residual image)

HIGH (default): High level of noise reduction (large residual image)

8 Black-and-white mode setting[D&N (IR) ] CP310 [D&N (ELE) ] CP300

The settings relating to the black-and-white mode can be configured. Follow the procedure below.

“CAMERA SETUP” screen		“D&N (IR)” screen
CAMERA SETUP		D&N(IR) (1)
SCENE1		AUTO1
ALC/ELC	ALC


SHUTTER	OFF	LEVEL	HIGH
AGC	ON(HIGH)	DURATION TIME	.I..
SENS UP	OFF		S L
WHITE BAL	ATW1
DNR	HIGH	BURST(BW)	ON
D&N(IR)	AUTO1
VMD	OFF
RET TOP END		RET TOP END

Step 1

Move the cursor to "D&N (IR)" or “D&N (ELE)” and select the mode from the following.

CP310 AUTO1 (default): Automatically switches between color and black-and-white images in accordance with the illuminance. The black-and-white mode is selected for dark images, and the color mode is selected for bright images.

AUTO2: Used for environment illuminated by near-infrared lamp. (wavelength ≥ 800 nm)

ON: Displays black-and-white images.

OFF: Displays color images.