Sony snt-v manual Pan/Tilt Driver and Video Camera ID Setup, Hint

Select the connected video camera from the [Select type of Sony driver] drop-down list.

Pan/Tilt Driver and Video Camera ID Setup

The (Pan Tilt) icon is displayed when a Pan/Tilt device is selected for the serial port usage. If the “Pan Tilt” icon is not displayed next to the icon of the applicable serial port, refer to “Serial Port Settings” on page 18 to reset the serial port usage.

Up to seven VISCA-compliant video cameras can be connected by daisy chaining to the two serial ports on the video network station, with pan/tilt/zoom controlled by the ID number of each video camera. The “Pan Tilt” icon is used to set the driver, video camera ID number and video camera preset position for each connected device.

The following example describes connection of an EVI-D30/D31/G20/G21.

1 Click the “Pan Tilt” icon in the Items area. The “Pan Tilt Settings” screen appears.

2 Verify that [Sony Visca Driver] is selected in the [Select Driver] drop-down list.

3 Click the Driver Specific Settings icon to change the ID number of the video camera.

The “Specific parameters for Sony G20/G21 and Sony D30/D31” page appears.

4

5 Select an ID number in one of the [Camera 1] to [Camera 4] drop-down lists.

zHint

•The ID number must be unique from other devices.

•Set the number according to the daisy-chain connection sequence.

•When an HSR-1/1P/2/2P is connected to the COM1 terminal, an ID number can be set for each camera connected to the HSR-1/1P/2/2P.

6 Click the [Apply] button.

Settings are applied, and a “Preset Positions” icon is added to the video camera for which the ID number was set.

7 If setting video camera preset positions, go to “Setting Pan/Tilt Camera Preset Position” below. Otherwise, click the [Close] button to finish with settings.

19