Modem Setup

Installation

The (Modem) icon is displayed when [Modem] is selected for the serial port usage. When a modem is connected to the video network station, if the “Modem” icon does not appear next the “COM2” icon, refer to “Serial Port Settings” on page 18 to reset the serial port usage.

1 Click the “Modem” icon.

The “Modem Settings” page appears.

2 Set the necessary items. Settable items are shown in the table below.

Setting	Description
Modem Type	Select the connected modem. If a
	matching modem type cannot be
	found, select [Generic].

Ignore Dial	Select [NO] to start connecting after
Tone	detecting a dial tone, or select [YES] to
	start connecting without a dial tone.

Type	Select [Null] if the modem is connected
	with a null-modem (crossed) cable, or
	[Autodetected Modem] otherwise.

Baud Rate	Select the communication speed
	between the serial port and modem.

Dial Prefix	Select either [Tone Dialing (ATDT)] or
	[Pulse Dialing (ATDP)] according to
	the type of telephone circuit used for
	the modem connection.

Flow Control	Select [CTS/RTS] if flow control is
	available, or [OFF] to disable flow
	control.

Init String	If [Modem Type] is set to [Generic
	Modem], enter the required modem
	initialization string.

3 Click the “Save” icon to save your settings when finished.

ISP (Internet Service Provider) Setup

The (ISP) icon is displayed when [Modem] is selected for the serial port usage. The “ISP” icon is used to set up connection with an “ISP” (Internet Service Provider). If the “ISP” icon is not displayed, reset the serial port usage according to “Serial Port Settings” on page 18.

1 Click the “ISP” icon.

The “ISP Settings” page appears.

2 Set the necessary items. Settable items are shown in the table below.

Setting	Description
Select ISP	Select the destination ISP. If a
	matching ISP cannot be found, select
	[Generic].

Phone	Enter the telephone number of the
Number	connection destination.

Alternative	Enter the alternate telephone number
Number	to be used if connection cannot be
	established with the above number.

User Name	Enter the user name for ISP host login.

Password	Enter the password.

Connection	Select [Always Open] to allow
	unlimited connection to the ISP. Select
	[Close after] to limit the connection
	time, and enter the time limit (in
	seconds). To have the ISP connection
	cut automatically after transferring
	images, select [Optimized].

Redial	Enter the number of times to attempt
Attempts	redialing when a connect attempt fails.

Redial Interval	Enter the interval (in seconds)
	between redial attempts.

3 Click the “Save” icon to save your settings when finished.