Alarm Inputs
Four photocoupler inputs are provided for alarm inputs. Alarm signals can be connected to any of the inputs as follows.
To use the electrically isolated inputs, the connected device must have 5 to
Inside server← → | Outside server |
Approx. 4.7 kΩ | Alarm Device |
| |
Pins 3, 5, 11 and 13+ | |
| 5 to 20V DC Output |
Pins 4, 6, 12 and 14– | |
Pin 15 |
|
Max. 24V AC/DC |
|
@100 mA |
|
Pin 16 |
|
If an alarm device has mechanically switched or open- collector outputs that do not need to be electrically isolated, connect as follows.
Inside server← | → | Outside server | |
Pin 9 |
|
|
|
Approx. 4.7 kΩ |
|
|
|
Pins 3, 5, 11 and 13 |
| ||
Pins 4, 6, 12 and 14 |
| ||
Pin 10 |
|
|
|
Mechanically switched | Mechanically | ||
output device |
| switched output | |
|
|
| device |
•Refer to the respective manuals for details on setting up the
•Please note that specifications and external appearance may be changed for purposes of improvement without notification.
43