Settings, Hints | Sony snt-v specs

Settings

This chapter describes how to set up the video network station for various system types and applications. Video network station settings are made using Internet Explorer 5 (or later).

Note

If the computer used for making video network station settings or viewing the monitor screen is shared with other users, we recommend closing the Web browser when finished operations. Until the browser has been closed, even after moving to another Web page, the password-protected video network station’s Web page remains accessible, for example, by clicking the [Back] button.

zHint

•The IP address must be assigned according to the “IP Address Assignment” procedure on page 8 before setting the video network station.

•Items that can be set are listed in the “Settings List” on page 44.

Basic Settings with the First

Time Installation Wizard

Click (First Time Installation Wizard) to make the basic video network station settings with interactive instructions.

The “First Time Installation Wizard” icon appears on the “Welcome” page.

zHints

•Settings can be made without the Wizard. In this case, click the [Admin] button on the “Welcome” page, and refer to “Accessing the Administration Overview Page” on page 12.

•If the “Layout and Application Wizard” (page 13) has been used to make settings when the server was accessed in the past, the “Welcome” page does not appear. In this case, click the Admin button on the “Welcome” page, and refer to “Accessing the Administration Overview Page” on pege 12.

•The “First Time Installation Wizard” can be accessed from the Administration Overview page.

1 Click the “First Time Installation Wizard” icon on the “Welcome” page, and click [OK] when the confirmation message appears.

The Wizard appears.

2 Follow the Wizard’s on-screen instructions to make the settings. Refer to the “Settings List” on page 44 to see which items can be set using the Wizard.

3 Click the [Finish] button when you reach the end of the Wizard.

A server reboot confirmation message appears.

4 Click [OK].

The settings are saved.

5 Click the Browser’s [Refresh] button.

The monitor screen appears with the new settings applied.

To change settings in the future, or to set parameters not available in the Wizard, refer to the following “Accessing the Administration Overview Page” section.