Sony snt-v manual HSR-1/1P/2/2P Control

HSR-1/1P/2/2P Control

The HSR-1/1P/2/2P is controlled from the [HSR CONTROL] page, displayed by clicking the [CTR] button in the HSR View. Functions specific to the HSR-1/1P and HSR-2/2P are described below. Please refer to the HSR-1/1P/2/2P Users Guide for details of other functions.

1

23 4 5

1[REVERSE] / [FORWARD] Slider

Dragging the slider when playing a video tape varies the playing speed. Both [FORWARD] and [REVERSE] playing speed can be adjusted from 1/ 30th to 16 times normal. Play is stopped at the center position.

The slider stops at the point where it is released after dragging. To resume playing at the new speed after interrupting play with the [X] (Pause) or [B] (Play) button, drag the slider again.

2[ALARM CANCEL] Button

Clicking this button cancels the alarm input to the HSR-1/1P/2/2P. It can be used to cancel the alarm before the cancellation interval set for the HSR-1/1P/2/ 2P has elapsed.

3[X] (Pause) Button

Clicking this button during variable speed play with Slider 1 pauses image play.

4[PRE-REVERSE PLAY] Button

This button is enabled when an HSR-2/2P is connected to the video network station. Clicking this button while recording with the HSR-2/2P rewinds by the specified Pre-Reverse Time value, and then plays. This action (play while recording) is the same as pressing the PLAY key on the HSR-2/2P while recording. However, PRE-REVERSE PLAY cannot be started while recording by clicking the [B] (Play) button on the “HSR CONTROL” page of the video network station. Clicking the [B] (Play) button after changing playing speed while recording results in 1⋅ play speed.

5[REC END SEARCH] Button

Clicking this button locates the end of the recorded part of the tape. It duplicates the operation of the Rec End Search item on the HSR-1/1P/2/2P “Time Search” Screen.

35