Installation
Dialog boxes relating to [Input 1] (Alarm Input 1) to [Input 4] (Alarm Input 4) are displayed for the following items.
Setting | Description |
Alarm Enabled | Alarm input is enabled when this box is |
| checked. |
|
|
Always | Alarm input is always enabled when |
| this radio button is selected. |
|
|
Restricted | Alarm input is enabled for a specific |
Between | time of day when this radio button is |
| selected. |
|
|
Start | When the [Restricted Between] radio |
| button is selected, enter the start time |
| here. |
|
|
Stop | When the [Restricted Between] radio |
| button is selected, enter the stop time |
| here. |
|
|
Mon to Sun | Check the boxes to specify particular |
| days on which the alarm input should |
| be enabled. |
|
|
Alarm ON at: | Check this box to have a rising alarm |
input signal indicate the occurrence of | |
| an alarm event. |
|
|
Alarm ON at: | Check this box to have a falling alarm |
input signal indicate the occurrence of | |
| an alarm event. |
|
|
Image every X | Select the storage interval for images |
second(s) | during an alarm event. |
|
|
Number of PRE | Enter the number of images (0 to 99) |
alarm images | to be saved prior to an alarm event. |
|
|
Number of POST | Enter the number of images (0 to 99) |
alarm images | to be saved after an alarm event. |
|
|
Alarm duration | Enter the time (seconds) from an |
| alarm occurrence until the alarm mode |
| is cleared. |
|
|
No Upload | Select this radio button to disable |
| transfer of saved images. |
|
|
Upload Via FTP | Select this radio button to transfer |
| saved images by ftp. |
|
|
Host Name | Enter the host name of the transfer |
| destination. |
|
|
User Name | Enter the user’s name on the host at |
| the transfer destination. |
|
|
Password | Enter the password of the above user. |
|
|
Upload Via | Select this button to send a saved |
(one image only) | image as an |
|
|
To Email | Enter the mail address of the |
| destination for image files. Multiple |
| addresses may be entered by |
| separating with commas. Up to 100 |
| characters may be entered. |
|
|
Subject | Enter the title text for the |
|
|
Text | Enter the body text for the |
|
|
Setting | Description |
|
|
Camera Link | Check this box to include in the |
| a link to the |
| camera where an alarm event occurs. |
|
|
Upload Path: (FTP | Enter the path of the save destination |
only) | for image files sent by ftp to a host. |
|
|
Base File Name | Enter the base file name for image |
| files to be sent. |
|
|
Date/Time Suffix | Select this radio button to have the |
| date and time appended to the base |
| file name. |
|
|
Sequence | Select this radio button to have a |
Number | sequential number appended to the |
Suffix set to | base file name. |
Maximum |
|
|
|
Sequence | When a sequential number is attached |
Number | to the base file name, to set an upper |
Suffix up to: | limit to the numbering, select this radio |
| button and enter the upper limit. |
Network Settings
The (Network Settings) icon is used for settings related to the supporting network protocol. Clicking the “Network Setting”s icon displays the following screen.
Settings can be made with the following procedures.
• (Network Wizard) icon: click to display Wizard instructions for making the settings.
• (Detailed View) icon: click to display a dialog box with [TCP/IP], [DNS] and [SMTP EMail] tabs that you can select to make corresponding settings.
14