Sony snt-v manual Part Names and Functions Rear Panel, AC in 12 V Input Terminal, MAC Address

Page 6

Part Names and Functions

Rear Panel

12

AC IN
(12V)	COM 1

~~ A3 C3 A4 C4 B A

1 2 3 4 5 6 7 8

+	– A1 C1 A2 C2 RELAY
6	7

34

	ETHERNET
COM 2	10 /100

1AC IN (12 V) Input Terminal

The supplied AC adapter connects here.

2COM 1 Terminal (9-Pin D-Sub)

The EVI-D30/D31/G20/G21 or HSR-1/1P/2/2P can be connected to here. The EVI-D30/D31/G20/G21 connects using VISCA cable, and the HSR-1/1P/2/2P connects with RS-232C cable.

3COM 2 Terminal (9-Pin D-Sub)

The EVI-D30/D31/G20/G21 or a modem can be connected to here. The EVI-D30/D31/G20/G21 connects using VISCA cable, and the modem connects with RS-232C cable.

4ETHERNET 10/100 Terminal (RJ-45) Using Category 5 twisted-pair cable, connect this terminal of the server to the network as a 10-Mbps Ethernet or 100-Mbps Fast Ethernet device.

5I/O Terminal Block Connector

This is an accessory input/output connector, used for alarm inputs. Refer to “Basic Specifications” on page 41 for details.

6MAC Address

The MAC address is shown on the label on the bottom.

6

Image 6

Contents User’s Guide Mode d’emploi Video Network StationVorsicht For the customers in the United KingdomTable of Contents VideoVideonetworkNetworkstation FeaturesStation Features Part Names and Functions Front PanelCOM 1 Terminal 9-Pin D-Sub Part Names and Functions Rear PanelAC in 12 V Input Terminal COM 2 Terminal 9-Pin D-SubUsing the EVI-D30/D31 Using the HSR-1/1P/2/2PSystem Application Examples Hint SettingsBasic Settings with the First Time Installation Wizard HintsMenu Installation Accessing the Administration OverviewSettings Area ItemsApplication Settings Monitor Screen and Alarm Function SetupLayout Settings Setting DescriptionInstallation Network SettingsSystem Administration Security Setting a Site NameSet Date and Time Changing Passwords and User Registration Changing the System Administrator PasswordRegistering a User Displaying Release Notes Reverting to Factory Default SettingsDisplaying the Parameter List Displaying the Log FileInstallation Serial Port Settings Setting Options DescriptionPan/Tilt Driver and Video Camera ID Setup HSR-1/1P/2/2P Setting Precautions Setting Pan/Tilt Camera Preset PositionHSR-1/1P/2/2P Setup Always click the SET button after making a settingRecording Mode Setting Procedure Service USE Page is for Maintenance ServiceModem Setup ISP Internet Service Provider SetupVideo Input Setup Video Image SettingsEnabling and Disabling Video Inputs Setting the Video Input Modulation Method Automatic SettingManual Setting Modem Setup ZHint Setting the Video Input Modulation Method Accessing the Monitor Screen OperationAbout the Operating Environment Operation Camera View Operations HSR Button Preset Drop-Down ListAdmin Button Qa Site NameStep Operation Pan/Tilt/Zoom ControlPan/Tilt/Zoom Control Operation PositioningViewing Alarm Event Images Alarm Event ActionsViewing the Alarm List Screen OperationViewing the Alarm Replay Screen Paging Icons Viewing Thumbnails The Alarm Thumbnail ScreenAlarm Event Image AR ButtonHSR View Mode Indicators Camera Number ButtonsPaging Buttons Display Partition ButtonsB Buttons Camera ButtonHSR-1/1P/2/2P Control Log File Display on the Administration Overview Log File InformationChecking the Log File Page Connecting the Alarm Device Alarm Input Settings HSR-1/1P/2/2P SettingsVideo Network Station Settings Alarm Output SettingBasic Administration If You Suspect a Problem Lithium Battery ReplacementSymptom Possible Remedy Cause Basic Specifications TCP, IP, HTTP, FTP, SmtpBasic Specifications Terminal Block Connector Pin OutRS-232 Serial Interface Terminal Pin Out Alarm Inputs Application Design Settings ListSettings List NetworkCOM VideoRepairs within the warranty period Warranty CardAfter Sales Service Repairs outside of the warranty period