Soehnle 7710 operating instructions Power-off, OFF display, Zero tracking

Page 43

English

Power-off

If the sensors are strained or you have called up a menu, the scale will not power off until the ON/Off key has been pressed for 3 seconds.

The scale cannot be powered off while waiting for an input for editing in setting mode. To power-off you must exit the editing area.

OFF display

In the Service/General/OFF display setting mode you can set whether

the word "OFF" is to appear in the display when the scale is switched off (medical directive).

Zero

Zeroing corrects minor deviations from the zero point caused, for example, by soiling of the scale.

The following symbol in the symbol bar indicates zero: >0<.

Zero range calibratable and non calibratable: -1% to +3% of the weighing range. If zeroing is not possible, the error message

"Above zero range" or "Below zero range" appears for two seconds.

Zero tracking

Zero tracking automatically corrects minor deviations from the zero display.

x 10 display

Indicates the weight value with an additional decimal in 10 times higher resolution.

+

Switch to x10 display by pressing first the Print key and then simultaneously the

Zeroing key.

 

According to the Calibration Law, the x10 function on a calibratable scale must only be activated briefly for checking purposes.

For bed weighing, the x10 function is programmed to switch off again automatically 5 seconds after being activated.

While the ten times higher display is activated, X10 appears in the symbol bar. When the appliance is switched off, the function is deactivated.

43

Image 43
Contents 7710 Inhalt DeutschVerwendungszweck CE- KennzeichnungKlassifizierung SicherheitshinweiseReinigung Wartung und ServiceVerwendung von Zusatzgeräten AnwendungsteilHinweis EntsorgungGewährleistung Haftung Min Erläuterung der Schilder und SymboleElektronisches Typenschild und Eichzähler MaxDas Bedienkonzept Technische DatenWeitere technische Informationen Aufstellen der WaageTastatur im Einstellmodus Der EinstellmodusTastenfunktionen im Einstellmodus Aufruf des EinstellmodusEingaben im Einstellmodus Einstellungen im EinstellmodusProgrammeinstellungen Tastatur Einstellungen TerminalVersion AnzeigeBenutzerpasswort Reset TerminalDer Funktionsmodus OrganisationdatenTastatur Nebenanzeige Symbole in der SymbolleisteSymbolleiste AnzeigeSymbol für Stillstand Einschaltnullstellgrenzen InbetriebnahmeEinschalten AchtungNullnachführung AusschaltenNullstellen OFF-AnzeigeAblauf der Eingabe Numerische Felder Alphanumerische EingabeArten der Eingabefelder Aktivierung der EingabefelderDeutsch Wiegen mit manuellem Tara Wiegen und TarierenDisplayansicht Funktionstaste Anwendung Wiegen mit TarahandeingabeDialysefunktion Einstellung der BetriebsartTaragewichte in Tarafestwertspeicher eingeben Wiegen mit TarafestwertspeicherTarafestwertspeicher ändern oder überschreiben Löschen eines vorhandenen Festwerts Fehlermeldung beim TarierenAnzeigemöglichkeiten mit der Info-Taste Aufruf der Liste Tarafestwertspeicher zum TarierenBMI-Funktion Schnittstelle für den Drucker konfigurieren DruckenStandard Druckbilder Werkseinstellung Druckauslösende Bedingungen Fehlermeldung Ursache /Abhilfe / InfoStellten Nullsetzgrenze liegt Wert oberhalb Nullsetzgrenze English ContentIntended use Safety instructionsCE marking ClassificationApplicator Maintenance and serviceCleaning Use of additional devicesDisposal Warranty LiabilityElectronic nameplate and calibration counter Explanation of signs and symbolsOperating concept Technical dataInstalling the scale Additional technical informationKeypad in setting mode Setting modeKey functions in setting mode Calling up setting modeInput in setting mode Settings in setting modeProgram settings Date/time Terminal settingsDisplay KeypadUser password Function modeOrganisation data Keypad Additional display Symbols in the symbol barSymbol bar DisplaySymbol for standstill Zero range limits at power-on Power-onGetting Started Zero tracking Power-offZero OFF displayActivating input boxes Input procedure Numerical boxesAlphanumeric input Types of input boxEnglish Weighing with manual tare Weighing and taringDisplay view Function key Application Setting the mode of operationWeighing with manual tare input Dialysis functionWeighing with a fixed tare value memory Inputting tare weights into the fixed tare value memoryChanging or overwriting a fixed tare value memory Possible displays with the Info key Error message when taringCalling up the list of fixed tare value memories for taring Application Press the F key BMI functionStandard print template factory setting Configuring the I/O port for the printerPrinting Print-command conditions Error message Cause /Remedy / InformationEnglish Français Consignes de sécurités de sécurité Marque CEUtilisation Nettoyage Maintenance et serviceUtilisation dappareillage annexes Sondes et capteursRemarques DestructionGarantie responsabilité Etiquette électronique et compteur de calibration Description des étiquettes et symbolesCompteur de calibration Concept dutilisation Installation de la balanceCaractéristiques techniques Autres informations techniquesFonction des touches en mode paramétrage Mode paramétrageFonction des touches en mode paramétrage Appel du mode paramétrageLes entrées en mode paramétrage Paramétrage en mode paramétrageParamétrage programme Date /Heure Paramètres de lindicateurAffichage ClavierMot de passe utilisateur Mode fonctionReset Indicateur Donnes dorganisationTouches disponibles ClavierZone affichage secondaire Pictogramme des symbolesZone symboles AffichageSymbole de stabilité Mise en marche Mise en servicePlage de remise à zéro Zéro suiveur Eteindre la balanceRemise à zéro Affichage OFFOpération dinsertion Champ numérique Entrées alphanumériquesDifférents champs dinsertion Appel de ces champs dinsertionPeser avec tare manuelle Peser + TarerEtat de lafficheur Touche de fonction Appel de la fonction dialyse Peser en entrant une tare au clavierFonction dialyse ProgrammationCréation dun jeu de tare Peser avec des tares en mémoireRemplacer une valeur dun jeu de tare Effacement dun jeu de mémoire Message derreur lié à la tareAffichage par la touche Info Appel dun jeu de mémoireSélection de la fonction BMI Fonction BMI indice de masse corporelleAppel de cette fonction Impression Configuration de linterface pour limprimanteImage dimpression par défaut Messages derreurs Causes, remèdes et infos Commandes de déclenchement dune impressionPlage Page Soehnle Professional GmbH & Co. KG