Omega DP26-RTD manual Mounting the Meter, Plcs

3.3 MOUNTING THE METER

PANEL

CUT-OUT

		REAR
		(REMOVED)
	CONNECTOR		COVER
	LABEL
PRODUCT		CASE
LABEL

"NEW" STYLE MOUNTING BRACKET

"OLDER" STYLE MOUNTING BRACKET 2 PCS

GASKET

FRONT BEZEL

Figure 3-3 Meter - Exploded View

1.Cut a hole in your panel, as shown in Figure 3-3. For specific dimensions refer to Figure 3-4.

2.Insert the meter into the hole. Be sure the front bezel gasket is flush to the panel.

3.Slide on mounting bracket to secure.

PANEL THICKNESS

	6,4 (.25)		MAX
	0,8 (.03)		MIN
1,5
R(.06)	45,00	+ 0,61/-0,00
4 PLCS	(1.772	+ .024/–.000)

4. Proceed to Section 3.4 to	92,00	+ 0,81/–0,00
connect your sensor input
	(3.622	+ .032/–.000)
and main power.

NOTE: Dimensions in Millimeters (Inches)

Figure 3-4 Panel Cut-Out

15