Omega DP26-RTD manual Table of Contents

Table of Contents

Section

Page

1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.1 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.2 SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2. ABOUT THE METER			. . .3
2.1	DESCRIPTION		. . .3
2.2	STANDARD FEATURES		. . .3
2.3	AVAILABLE ACCESSORIES		. . .4
2.4	FRONT OF THE METER		. . .5
2.5	FRONT-PANEL BUTTON LOCK OUT		. . .8
	2.5.1	Push Button Lock Out	. . .8
	2.5.2	Jumper Lock Out	. . .8
2.6	BACK OF THE METER		. . .9
2.7	DISASSEMBLY		. .11
3. GETTING STARTED			. .12
3.1	RATING/PRODUCT LABEL		. .12
3.2	MAIN BOARD POWER JUMPERS		. .12
3.3	MOUNTING THE METER		. .15
3.4	CONNECTING SENSOR INPUT		. .16
3.5	CONNECTING MAIN POWER		. .17
3.6	CONNECTING ANALOG AND RELAY OUTPUT CONNECTIONS		. .19
4. CONFIGURING THE METER			. .20
4.1	SELECTING THE INPUT TYPE (INPT)		. .20
4.2	SELECTING DECIMAL POINT POSITION (DEC.P)		. .20
4.3	SELECTING READING CONFIGURATION ("RD.CF")		. .21
4.4	SETTING SETPOINT 1 CONFIGURATION (S1.CF)		. .22
4.5	SETTING SETPOINT 2 CONFIGURATION (S2.CF)		. .23
4.6	SETTING SETPOINT 1 DEADBAND (S1.DB)		. .24
4.7	SETTING SETPOINT 2 DEADBAND (S2.DB)		. .25

iv