Invacare HF2PCM2KIT manual External Examination

Page 11

SECTION 4—INSPECTION AND COMPRESSOR INTERFACE

External Examination

1.Examine the outside of the cylinder for the following conditions, and replace the cylinder if they exist:

•Dents or dings

•Arc Burns

•Oil or Grease

•Any other signs of damage that might cause a cylinder to be unacceptable or unsafe for use.

2.Examine the cylinder for evidence of fire or thermal damage. Evidence includes charring or blistering of the paint, or other protective coating or heat sensitive indicator. If fire or thermal damage is found, replace the cylinder.

3.Inspect the cylinder fillport for the following, and replace if found:

•Debris, oil or grease

•Noticeable signs of damage

•Signs of corrosion inside the valve

•Signs of excessive heat or fire damage

Part No 1143247

11

Oxygen Conserving Cylinder

Page 10 Page 12
Image 11
Page 10 Page 12
Contents HomeFill Oxygen Conserving Cylinder Oxygen Conserving Cylinder Table of Contents Intended USE Special NotesReceiving Inspection General Guidelines General Guidelines General Guidelines Product Diagram FeaturesTypical Product Parameters Cylinder Prefill Inspection Inspection and Compressor InterfaceExternal Examination External Examination Connecting/Disconnecting the Cylinder to/from the Compressor Outer Ring Sleeve Connecting the Cylinder to the Compressor Disconnecting the Cylinder from the Compressor Fillport Covers Changing the Carrying Position of the Cylinder Changing the Carrying Position of the Cylinder Cleaning the Cylinder Bag Operating Instructions Operating Instructions Maintenance Cylinder Fill Times TroubleshootingCylinder Fill Times Limited Warranty Limited Warranty USA
Top Page Image Contents