Recoton/Advent EC Series Zero Return Range, Backlight, Unit Selection, APW Re-computing

EC Series EN-11

5.5 Zero Return Range

Sets the level in which the zero point is stable; the higher the setting, the more stable.

The following settings are available: 0, 1, 2, 3, 4, 5 (level)

5.6 Backlight

Sets the activation mode of the backlight.

The following settings are available: 0 = Auto-on with items greater than 9d placed on the pan or any

key is pressed; turns off after 5 seconds of inactivity.

1 = Manual; press the decimal point key [.] to switch the backlight on or off.

5.7 Unit Selection

Sets the active weighing unit.

The following settings are available: 0 = Grams (g), 1 = Pounds (lb)

5.8 APW Re-computing

Sets the APW re-computing mode. Optimizes piece weight accuracy by automatically re-computing the existing APW as further pieces (less than the original quantity on the pan) are added (a beep will sound in this event).

The following settings are available: 0 = Off, 1 = On

Weight	g	Piece Weight g/pc	Count	pcs
	0.		------
		t.rAtE
Default Setting		Zero Return Range	Internal Count
			(disregard)

Weight	g	Piece Weight g/pc	Count	pcs
	0.		------
		bL
Default Setting		Backlight	Internal Count
			(disregard)

Weight	g	Piece Weight g/pc	Count	pcs
	0.		------
		Unit
Default Setting		Weighing Unit	Internal Count
			(disregard)

Weight	g	Piece Weight g/pc	Count	pcs
	0.		------
		AV
Default Setting		APW Re-averaging	Internal Count
			(disregard)

3 EC-textEN.pmd 11 8/9/2005, 1:41 PM