Excell Precision FM user manual Command Mode, Command Function

EXCELL PRECISION CO., LTD.

2Command Mode

Command	Function	Command	Function
READ, RW	Weight Reading	CT	Tare Clearing
ZERO, MZ	Weight Re-zeroing	Rl	Weight Accumulation
TARE, MT	Gross Weight Reducing	Rm	Times Accumulation
NTGS	Gross / Net Switch	Rn	Date
MG	Gross Weight Indicating	Ro	Time
MN	Net Weight Indicating	AT	Weight and Times
			Accumulation
		DT	Weight and Times
			Accumulation Clearing

ŒAfter setting the commands mentioned above, it’s necessary to add the termination

code “CR(0DH) and LF(0AH)”.

•If the command is not correct, it will reply “E” + “Command Unidentified”.

ŽIf setting command mode with address (RS1-06 = 4), add “@ address” in front of each command.

Example: When RS1-08 = 1, for reading weight value, the whole complete command should be “@01RW(CR)(LF)”.

FM User Manual 33 SME300000119