Futrex Futrex -5000/XL manual F4 Color Printer Selection, F8 Data Stream

Page 29

 

After entering the Function Mode:

1

Press 3.

The display will show either "F3 0" or "F3 1".

If "F3 0" is displayed, the Dotson-Davis Equation will be used.

If "F3 1" is displayed, the Dotson-Davis Equation will be omitted from the Body Fat Estimation Program.

a)To Change Between Equations:

Press either 0 or 1 and the display will show the change. Press ENTER if this is the correct change.

b)To Exit the Function Mode, turn the unit OFF.

F4 - Color Printer Selection

After entering the Function Mode:

a)Press 4

If "0" is displayed, the unit is set to print using the Color Forms.

If "1" is displayed, unit is set to print Fitness Analysis on plain paper.

b)To change, press "0" or "1". Press ENTER to save the change.

c)To Exit the Function Mode, turn the unit OFF.

F8 - Data Stream

This function allows the FUTREX-5000XL measured data to be sent to an external PC computer.

!If F8 is "0", no data is being sent.

!If f8 is "1", all measured data will be sent to the external computer.

F5 and F7 are not used, but they must be set to "0" or the instrument will not function properly. F6 is not used, but must be set to "1" or the instrument will not function properly.

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents FUTREX7-5000/XL Body FAT and Fitness Computer Table of Contents Main Body Optical Standard Light Wand Printer Paper Installation Battery InstallationPreparation C AdapterPage FUTREX-5000A/ZL Models of the Futrex Body FAT and Fitness ComputerFUTREX-5000/XL Percent Body FAT Measurement Small Frame Medium Frame Large Frame Frequency Time To Repeat the Measurement Sequence Off Message Selecting the Biceps Measuring Site Press Enter Adjusting the Percent Body FAT ReadingDuring countdown press CLEAR, Select PROGRAM, Risks Estimating Relative FAT Distribution Yed Page Self Measurement of Percent Body FAT Setting the Correct Date Page Fitness Analysis Printout ProgramsTo Obtain a Fitness Analysis Printout Press the Select Program KeyUpdate Analysis To Obtain an Update Analysis Printout To Print Another Update Analysis follow steps 3 through Color Printer F1 Selection of English or Metric Units Function ModeTo Enter into the Function Mode F3 Use of Dotson-Davis Equations F2 Selection Calorie Limit ModeF8 Data Stream F4 Color Printer SelectionTroubleshooting Problem Probable Cause Corrective Measures Problem Probable Cause Corrective Measures For More Information or ASSISTANCE, Call Problem Probable CauseCorrective EstimateS Measurement Technique General SpecificationsKey Name Keypad Description
Top Page Image Contents