Smeg WO-01 manual Special adjustments, Inactivity

Page 11

Special adjustments:

RECIRCULATION

Recirculation retreats the waste water to reduce the amount of water rejected. Turn the needle valve “Recirculation” to retreat the waste water, thus reducing overall water consumption.

Important!

Make sure, when making adjustments, that the pressure gauge reading never exceeds 10-11 bar.

BYPASS

Turn the “Bypass” needle valve to adjust the conductivity of the osmosis-treated water, at the expense of the hourly water production and the amount of water rejected.

NOTE:

In both cases, before setting the needle valves you must slacken off their collars and tighten them down after the adjustment has been made.

RecirculationBypass

Collar

Inactivity:

There are no special warnings regarding maintaining the appliance’s operability when kept inactive for short periods of time.

For long periods of inactivity contact your local Authorised Reseller so that he can remove and store the inverse osmosis membranes and also restart the unit after recommissioning as for the first installation.

- 37 -

Page 10 Page 12
Image 11
Page 10 Page 12
Contents WO-01 Page Contents General warnings Technical characteristics 150-600 KPa Bar Plumbing hookup PositioningElectrical hookup Page Delivery pump startup first startup Pressurizing and starting up the unitReplacing the membranes Replacing the pre-filterInactivity Special adjustmentsPlumbing diagram FIL Wiring diagram Hook UP J2 Green Power LED RES List of faults Osmosis-treated water not produced Water production not conforming Page Electronic circuit board and programming Page
Top Page Image Contents