Removing Clogs
Hose Inlet
Entrée du tuyau Conección de manguera
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢Check the handle and extension wand area.
➢Remove handle by pressing handle quick release button.
➢Visually inspect the hose and the base area into which the hose is connected.
➢Remove any visible clog.
➢Plug in the vacuum cleaner and turn it on.
➢Stretch the hose to maximum length and then allow the hose to return to its storage length.
➢Turn off and unplug the vacuum cleaner.
➢Remove lower plate. See: “Removing and Installing Lower Plate”
➢Inspect inlet of nozzle hose and clear any obstructions.
➢Remove dust bin and check for clogs.
➢If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area.
➢Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
- 60 -