English
Clean
Cleaning the trimmer
It is recommended to clean at every use.
1. Remove the trimmer from the AC adaptor. |
|
▼ | ▼ |
Cleaning with the brush
1.Remove the trimmer from the AC adaptor.
• Make sure that the trimmer is turned off.
2. Remove the comb attachment.
3. Hold the main body, place your
To remove light dirt
2.Remove the comb attachment and turn the trimmer on.
3.Run water down the water inlet at the back of the main body, rinse thoroughly for approximately 20 seconds, and then turn the trimmer off.
•Rinse with water and shake up and down several times to remove the water.
▼
To remove heavy dirt
2.Remove the comb attachment and blade assembly.
3.Clean the trimmer and the blade assembly with running water.
•Rinse with water and shake up and down several times to remove the water.
▼
thumb against the blade assembly and then push it away from the main body.
4. Brush off any hair trimmings from the main body and from around the blade assembly.
5. Brush any hair trimmings out from between the stationary blade and the moving blade while pressing down the cleaning lever to raise the moving blade.
6.Apply the oil to the blade.
7.Attach the comb attachment and blade assembly to the trimmer.
4. | Wipe off the water with a towel and let it | 4 |
| dry naturally. | |
|
| |
| • It will dry faster with the blade removed. |
|
5. | Apply the oil to the blade after drying. |
|
6. | Attach the comb attachment and blade |
|
| assembly to the trimmer. |
|
8