Charging/Recharging

9-position Zoom Wheel

Dual-blade system

A 9-position Zoom Wheel pro- vides the greatest choice of cutting lengths for a consistent trim every time. Adjust the trimming length by rotating the Zoom Wheel to the desired position number. Refer to the chart at right for the position number of your desired beard length.

Dual-blade system enables you to quickly change from a standard-width blade for full grooming to a narrow-width blade for detail trimming around a mustache or goatee, defining the beard line and clipping any stray single whiskers that may have been missed. With the trimming

guide attachment removed, depress the head rotation but- ton to rotate and position the desired blade over vacuum intake port. Be sure the head is locked into position before trimming.

Operating Your Trimmer

(MB-70, MB-100)

To recharge these models, use only the charging adapter provided.

■Turn the trimmer OFF. Insert the adapter plug into the bottom of the trimmer, then plug the adapter into an electrical outlet. The charging indicator will glow green, indicating the unit is charging. A full charge will take approx. 14-16 hours.

■Your trimmer cannot be overcharged. You may leave it plugged in between uses. However, if the trimmer is not going to be used for an extended period (2 weeks), unplug the unit and recharge when resuming use.

Corded Rechargeable Operation

(MB-100 only)

The MB-100 may be used with the cord plugged in or unplugged.

(MB-70 only)

The MB-70 is designed for cordless operation only. Plugging in the adapter cord will not provide power to the trimmer, but only recharge the batteries.

Hair Length Selector and Removable Trimmer Guard Attachment

NOTE: Trimmer guard must be attached to the trimmer in order to use the hair length selector. The hair length selector and trimmer guard attachment ensures precise trimming and has nine adjustable positions:

Setting	Beard Style	Length
1	Stubble look	1.5 mm - 0.06"
2		2.5 mm - 0.1"
3	Short	4 mm - 0.16"
4		5.5 mm - 0.22"
5	Medium	7 mm - 0.28"
6		9 mm - 0.35"
7		11 mm - 0.43"
8	Long	14 mm - 0.55"
9		18 mm - 0.71"

■Roll the “Zoom Wheel” toward the top of the trimmer to

adjust for longer length, and toward the bottom of the trimmer for shorter length. The wheel will click into one of nine positions.

■Begin trimming at one of the longest settings (#8 or #9) to avoid accidentally trimming hair too short. As you become

familiar with the settings, you can then select your desired length setting.

Trimmer Guard Attachment

Remove trimmer guard attachment if you are defining hairline edges such as sideburns, trimming the nape of your neck, trimming your beard line on front of neck, or if you want to clean the cutter assembly.

To remove:

■Be sure the trimmer is in the OFF position.

■While holding trimmer in one hand and holding the

“Zoom Wheel” to prevent it from turning, gently pull the trim- mer guard attachment away from the trimmer. The guard can be removed and replaced on any setting.

To replace:

■Be certain trimmer is in OFF position.

■While holding the trimmer in one hand, and holding the “Zoom Wheel” to prevent it from turning, slide the guard over the top of the trimmer until it clicks into position.

NOTE: The trimmer guard attachment can only be placed on the trimmer one way; if it does not fit properly, remove and reverse it.