Pelco C1487M-D operation manual SD5 Series Dimension Drawing

Page 47

5.25

(13.34)

3.25

(8.26)

7.25 (18.13)

6.60 (16.76)

5.90 (14.99)

8.25 (20.96)

IN-CEILING DOME

TOP PORTION OF BACK BOX	DOME IS SECURED
IS REMOVABLE FOR SURFACE	TO CEILING BY
MOUNT APPLICATIONS	MOUNTING BRACKET

	8.52
	(21.64)
	6.75
	(17.15)
10.90	5.83
(27.69)	5.83
	(14.80)

5.90

(14.99)

PENDANT DOME

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

Figure 18. SD5 Series Dimension Drawing

Ratings:	NEMA Type 1–In-ceiling back boxes, all dome drives
	NEMA Type 4–Pendant back boxes
	IP 66–Pendant back boxes
Weight	Unit	Shipping
In-Ceiling
Back Box:	2.6 lb (1.18 kg)	4 lb (1.81 kg)
Dome Drive:	2.65 lb (1.20 kg)	5 lb (2.27 kg)
Lower Dome:	.19 lb (.09 kg)	1 lb (.45 kg)
Pendant
Back Box:	2.85 lb (1.28 kg)	5 lb (2.27 kg)
	Add 1.25 lbs (.57 kg) for heater and sun shield
Dome Drive:	2.65 lb (1.20 kg)	5 lb (2.27 kg)
Lower Dome:	1.30 lb (.59 kg)	2.20 lb (1.0 kg)

Add .25 lbs (.11 kg) for heater

* Assumes no wind chill factor; for detailed test conditions, contact Pelco.

CAMERAS

COLOR (Spectra II™ and Spectra Lite™)

Signal Format:	NTSC (Spectra II™ model DD5AC)
	PAL (Spectra II™ model DD5AC-X)
	NTSC (Spectra Lite™ model DD5TAC)
	PAL (Spectra Lite™ model DD5TAC-X)
Scanning System:	2:1 interlace
Image Sensor:	1/4-inch interline transfer CCD

Pelco Manual C1487M-D (7/99)

47

Image 47

Contents Listed Contents List of Tables List of IllustrationsMeasures DE Securite Importantes Important Safeguards and WarningsGeneral Lower Dome IN-CEILING ModelsBack Box Dome DrivePendant Components Pendant ModelsSpectra II IN-CEILING Components DescriptionModels Spectra II Pendant ComponentsCeiling and Back BOX Preparation Installation for IN-CEILING ModelsSpectra Lite Pendant Components Spectra Lite IN-CEILING ComponentsSuspended Ceiling Installing Back BoxWiring Diagram for Spectra WiringRG6/U Cable Type Maximum DistanceTable B VAC Wiring Distances Back BOX InstallationBack BOX Connections From controller To 4-Wire terminal on circuit boardSpectra II Only The maxi Dome Drive Switch Locations Table C. Switch Settings for SW1For D-type control systems, refer to Table E Baud Rate Switch Setting SW2-6 SW2-7 SW2-8For P-type control systems, refer to Table D 100 117 177 Lower Dome Lower Dome Installation, In-Ceiling ModelsPENDANT-MOUNT Installation Installation for Pendant ModelsOperation SURFACE-MOUNT InstallationScan Speed POWER-UP DisplayPAN and Tilt Functions Auto FlipSpectra Lite Zoom Preset FunctionsZoom Spectra II ZoomPatterns AlarmsRANDOM, FRAME, and Auto Scanning ZonesPark Auxiliary OutputsWhite bal hue Spectra Lite only Prev to first camera submenu Programming the Spectra II and Spectra LiteBacklight Compensation Main Menu AccessDenotes items that apply to the Spectra II only Reset CameraZoom Limit GAIN/AGC AGC ModeAuto Iris GainShutter Speed Sharpness AUTO-FOCUS ModeLine Synchronization White Balance Color Cameras onlyPOWER-UP Mode Alarm Resume AUX ModeAlarm Priority Alarm DwellZone Blank Alarm PatternProportional PAN Turning Limit Stops On or Off Limit StopsPattern Length Park Time MinutesSymptom Unit does not operate TroubleshootingSymptom Motion problems Symptom Fan does not operateSymptom Alarms not going to preset Symptom Alarms not starting a patternDome Cleaning MaintenanceBack BOX Electronic Assembly Removal Mechanical SpecificationsSD5 Series Dimension Drawing Ntsc EIA Regulatory Notices Warranty and Return Information