Pelco C1487M-D operation manual Specifications, Mechanical

SPECIFICATIONS

MECHANICAL
Construction
Back box:	Aluminum
Dome drive:	Aluminum, ABS plastic
Lower dome:	Acrylic
Cable Entry
In-Ceiling:	.75" (1.91 cm) conduit fitting
Pendant:	Through 1.5" (3.81 cm) NPT pendant mount
Pan Movement:	360° Continuous pan rotation
Vertical Tilt:	Unobstructed +2° to -92°
Manual Pan/Tilt
Speeds*	0.5°-80°/sec manual operation, 150°/sec turbo
Pan:
Tilt:	0.5°-40°/sec
Preset Speeds	250°/sec
Pan:
Tilt	200°/sec

*For variable-speed operation an appropriate controller is required. With fixed-speed controllers, Spectra II™ and Spectra Lite™ pan speed is 30°/sec and tilt speed is 12°/ sec. The CM6700 controller with the KBD200 keyboard has programmable fixed speeds.

ELECTRICAL

Input Voltage: 18-30 VAC, 24 VAC nominal

Input Power

In-ceiling: 30 vA

Indoor pendant: 30 vA

Outdoor pendant: 75 vA

Fuse:	1.6 A
Relay Contacts	AUX 1	AUX 2 Output
Type:	Form C	Open collector transistor output
Voltage:	Low voltage (<40 V)	32 VDC maximum
Current:	2 A maximum	150 mA maximum

GENERAL

Environment

In-Ceiling: Indoor only

Pendant: Indoor/outdoor

Operating Range

In-Ceiling: 32° to 140°F (0° to 60°C) intermittent operation; 32° to 122°F (0° to 50°C) continuous operation

Pendant

Without Heater: 32° to 140°F (0° to 60°C) absolute maximum operating temperature; 32° to 122°F (0° to 50°C) sustained maximum operating temperature

With Heater*: (Assumes no wind chill factor; for detailed test conditions, contact Pelco.) Maximum operating temperature: 140°F (60°C) absolute maximum; 122°F (50°C) sustained maximum

Minimum operating temperature: -60°F (-51.11°C) absolute minimum; minimal icing at -50°F (-45.56°C) sustained minimum; prevents icing at -40°F (-40°C) sustained minimum; de-ices .1 inch (2.5 mm) within 3 hours after power-up

Dimensions: See Figure 18

46 Pelco Manual C1487M-D (7/99)