Multiquip GBC manual Cart type no lifiting hook, Transporting saFety

Page 11

Safety Information

loading and unloading Cart type - With lifiting hook

If lighting system is equipped with a transport lifting hook, refer to the following safety information.

Caution

Before lifting, make sure that lighting system parts are not damaged and screws are not loosened or lost.

ALWAYS make sure crane or lifting device has been properly secured to lifting hook of the equipment.

never lift the equipment while lighting system is running.

Make sure the mast is completely lowered before lifting the lighting system.

Use adequate lifting cable (wire or rope) of suffi cient strength.

Use one point suspension hook and lift straight upwards.

Never allow any person or animal to stand underneath the equipment while lifting.

do not lift machine to unnecessary heights.

Cart type - no lifiting hook

If lighting system is not equipped with a transport lifting hook and the mast is removable, refer to the following safety information.

Before lifting, make sure that the mast and lamp are removed as described in the manual.

The cart can be safely lifted by two persons to the transport vehicle.

transporting saFety

NOTICE

When transporting the lighting system, if applicable, always place in stow position and place mast in its carrying case.

ALWAYS remove balloon/lamp assembly from the mast when transporting lighting system. This will prevent damage to the bulb due to vibration.

never leave the balloon/lamp exposed during transport. Exposure to excess wind or rain could damage the balloon’s nylon cover.

ALWAYS place balloon inside its protective cover during transport. Be sure the cover is secured tightly around the balloon/lamp assembly.

gbc lighting system • operation and parts manual —rev. #0 (06/24/13) — page 11

Image 11
Contents This Manual Must Accompany the Equipment AT ALL Times Model GBCPage Page Fuel Chemical Warning GBC Lighting System Table of ContentsChoose from three easy options SaFety symBols Safety InformationSaFety messages General saFety  never unplug the lamp’s AC power cable during operation Lighting system saFetyLamp saFety  never attempt service on a running machinePower Cord/Cable safety Balloon saFetyGenerator saFety EleCtriCal saFetyCart type no lifiting hook Transporting saFetySpecifications Dimensions DimensionsIllumination Range Footcandle plot230V 50 Ft 100 Ft 200 Ft 300 Ft 400 Ft 500 Ft 600 Ft 800 Ft General informationGBC Components ComponentsAC Power Cable Connects to the AC power source Fold the balloon cover into itself and zip it up. See Figure SetupSecuring Cable with Hook Deploying outrigger OperationApplying Parking Brake Releasing Parking BrakeRaising the mast Stowing OutriggerStart the generator as indicated in the generator manual Applying PowerLowering the Mast Dimming the LampStorage Turn off the power switch of the generatorDisconnect the lamp connector from the AC power cable ShutdownRemove the lamp guard Figure MaintenanceReplacing Lamp Zip up the top and bottom of the new balloon. See Figure Replacing BalloonUnzip the top and bottom of the balloon. See Figure Locking Air Plate Filter replacementWait for lamp to cool down Loose?Lamp does not light Unplug all other appliancesC11 C10 C5 C8 Lamp Base Lamp base loose? Screw in securely Adjust Link for front shaftSpray grease Brake Not working properly? Adjust Power cable Defective or worn cable? Replace PlugWiring diagram Page Explanation of Code in Remarks Column GBC lIGHTING System 1 to 3 units Suggested Spare PartsNameplate and decals A400324600 A400324800A400324500 A400324000Balloon and lamp assy Part Name QTY Remarks Mast assy A400199700 A300175400A300175500 A300175600Base assy A300056800 A100064700A300147201 A300147301Outrigger assy A400176901 A3001622021641001430 A400175302Freight poliCy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help