Multiquip GBC Lamp Base Lamp base loose? Screw in securely, Tighten securely Brake pedal, Stopper

maintenance

Table 5. Periodic Check and Maintenance

FIGURE			PART		CHECK ITEM			SOLUTION
	L1	Lamp (Base)		Lamp base loose?			Screw in securely.		•
Lamp	L2	Lamp Holder		Lamp holder loose?			Replace.		#
	L3	Pipe Frame		Pipe Frame skewed?			Replace.		&
	L4	Lamp		Defective lamp?			Replace.		•
	B1	Balloon (Envelope)		Defective or dirty?			Replace.		•
Balloon	B2	Zipper		Broken?			Replace.		•
	B3	Fan Motor (Blower)		Not working properly?			Repair or replace.		$
	B4	T-handle bolt (balloon)		Broken?			Replace.		•
	C1	Outrigger		Movement not smooth?			Spray grease.		$
	C2	T-handle and wheels		Improper movement?			Tighten securely.		$
	C3	Bolt for handle		Bolt loose?			Tighten securely.		$
	C4	Brake pedal		Linkage not working correctly?			Check, spray grease.		•
				Notch worn-out?			Replace.		•
Cart	C5	Stopper		Damaged?			Replace.		#
	C6	Front wheel pivot		Does not turn smoothly?			Check, spray grease.		$
	C7	Tires		Tire pressure not 35.5 psi (294 kPa)?			Adjust.		•
	C8	Link for front shaft		Linkage not working correctly?			Spray grease.		$
	C9	Brake		Not working properly?			Adjust.		•
	C10	Lever		Lever loose?			Tighten securely.		•
	C11	Counterweight (Outrigger)		Does not work smoothly?			Spray grease.		•
Electric	E1	Power cable		Defective or worn cable?			Replace.		•
	E2	Plug		Damaged?			Replace.		#
• — Check daily			# — Every 20 hours			$ — Every 100 hours		& — Every 500 hours

gbc lighting system • operation and parts manual —rev. #0 (06/24/13) — page 29