components
Figure 3 shows the location of the controls and components for the GBC Lighting System.The functions of each control is described below:
1.Balloon Cover — Stores balloon when GBC is not in use. Allow a sufficient amount of time for the lamp to cool down before storing balloon. Possibility exists of balloon getting burned.
2.Balloon — Made of heat resistant polyester, with a diameter of 47.2 inches (1,200 mm). Balloon is self- inflating and inflates in less than 20 seconds.
3.Velcro — Used to easily attach optional message strip to the balloon.
4.Buckle — Used to hold the balloon together when storing inside the cover.
5.AC Power Cable — Connects to the AC power source.
6.Cart — Holds the generator and can be steered easily to transport GBC to different locations.
7.Locking Clamps — To secure the generator to the cart platform, place clamps around the pipe frame of the generator. Tighten securely to prevent movement.
8.Tire — The GBC uses four pneumatic tires for easy maneuverability.
9.Brake Pad — When the brake pedal is pressed, this pad will strike and hold the rear tires in place.
10.Strap Slots — Allows suitcase generators to be strapped to cart securely.
11.Outriggers — Provides stability to the GBC. When raising the mast, outriggers should always be deployed.
12.Counter Weight — Locks the outriggers in place when they are deployed or stowed.
13.Brake Pedal — Step on this pedal and pull back
14.
15.Mast — This mast is comprised of three separate stages. The mast can be raised in excess of 8 feet (without balloon).
WARNING
When raising the mast, always be on the lookout for overhead obstructions.
16.Mast Bolt — Loosen to raise mast and tighten to keep the mast in place when raised to the desired height.
17.Message Strip (OPTIONAL) — A 12 x 43 inch message strip (Part No. GBBALD1) may be attached to the balloon. The message strip can be purchased separately.
18.Zipper — Zips up balloon to completely close it when lamp is in place.
19.Lamp Holder — Holds lamp in place. Lamp is screwed into socket.
20.Lamp/Balloon Bolt — Used to tighten mast when attached to the lamp/balloon assembly.
21.Fan Motor (Blower) — Inflates the balloon as soon as power is applied to the GBC.
22.Lamp — 1000 watt metal halide bulb with pure white light for maximum illumination.
23.Lamp Guard — Protects the lamp from being hit by objects and balloon material from touching lamp.
gbc lighting system • operation and parts manual