Multiquip GBC manual Stowing Outrigger, Raising the mast

Page 21

operation

STOWING OUTRIGGER

1. Pull up the counterweight to unlock the outrigger and pull up outrigger. See Figure 16.

PULL UP

COUNTERWEIGHT

PULL UP

OUTRIGGER

Figure 16. Stowing Outrigger

2.Push in outrigger until it is all the way in and pull down counterweight to lock it in place. See Figure 17.

PUSH IN

OUTRIGGER

PUSH IN

OUTRIGGER

Figure 17. Locking Stowed Outrigger

raising the mast

DANGER

ALWAYS make sure the area above the lighting system is open and clear of overhead power lines and other obstructions. Contact with overhead power lines or other obstructions could result in equipment damage, electrical

shock, electrocution and even death.

CAUTION

When raising or lowering the mast, keep hands and fingers clear of the mast sections to prevent hand and fingers from getting pinched.

1.Raise the second mast to the desired height and tighten the T-bolt securely. See Figure 18.

SECOND

MAST

T-BOLT

Figure 18. Raising the Second Mast

2.To raise the mast higher, raise the third mast until the lock/release tab pops out. The tab will automatically rest on the second mast. See Figure 19.

THIRD

MAST LOCK/

RELEASE

TAB

Figure 19. Raising the Third Mast

gbc lighting system • operation and parts manual —rev. #0 (06/24/13) — page 21

Image 21
Contents This Manual Must Accompany the Equipment AT ALL Times Model GBCPage Page Fuel Chemical Warning GBC Lighting System Table of ContentsChoose from three easy options Safety Information SaFety messagesSaFety symBols General saFety Lamp saFety Lighting system saFety never attempt service on a running machine  never unplug the lamp’s AC power cable during operationGenerator saFety Balloon saFetyEleCtriCal saFety Power Cord/Cable safetyCart type no lifiting hook Transporting saFetySpecifications Dimensions DimensionsIllumination Range Footcandle plot230V 50 Ft 100 Ft 200 Ft 300 Ft 400 Ft 500 Ft 600 Ft 800 Ft General informationGBC Components ComponentsAC Power Cable Connects to the AC power source Fold the balloon cover into itself and zip it up. See Figure SetupSecuring Cable with Hook Applying Parking Brake OperationReleasing Parking Brake Deploying outriggerRaising the mast Stowing OutriggerLowering the Mast Applying PowerDimming the Lamp Start the generator as indicated in the generator manualDisconnect the lamp connector from the AC power cable Turn off the power switch of the generatorShutdown StorageMaintenance Replacing LampRemove the lamp guard Figure Replacing Balloon Unzip the top and bottom of the balloon. See FigureZip up the top and bottom of the new balloon. See Figure Locking Air Plate Filter replacementLamp does not light Loose?Unplug all other appliances Wait for lamp to cool downC11 C10 C5 C8 Spray grease Brake Not working properly? Adjust Adjust Link for front shaftPower cable Defective or worn cable? Replace Plug Lamp Base Lamp base loose? Screw in securelyWiring diagram Page Explanation of Code in Remarks Column GBC lIGHTING System 1 to 3 units Suggested Spare PartsNameplate and decals A400324500 A400324800A400324000 A400324600Balloon and lamp assy Part Name QTY Remarks Mast assy A300175500 A300175400A300175600 A400199700Base assy A300147201 A100064700A300147301 A300056800Outrigger assy 1641001430 A300162202A400175302 A400176901Freight poliCy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help