Braun 32899 Rev A manual Rear Over-Center, How$Wwdfkphqwv

WHEELCHAIR AND OCCUPANT RESTRAINT

J

K

Hook

Keeper

Rear Over-Center

%HOW$WWDFKPHQWV

1.Connect chair hook to a solid frame member of the chair close to the point where the chair back and cushion meet (as shown in Photo J).

2.Position and connect belt keeper

ÀWWLQJDWWDFKPHQW to appropriate track anchorage point (slots). Attach keeper as detailed on page 29. Pull

ÀUPO\RQEHOWWR

HQVXUHÀWWLQJLV locked in track. Note: Belt angles should be as shown in Figure 2.

L

M

3.With buckle open, pull loose end of belt until tight (see Photo L). While holding the loose end with one hand, close the lever of the clamp (buckle) down until it locks. See Photo M.

4.Connect Velcro™ tabs to keep excess

EHOWRIIÁRRU6HH

Photo N).

Repeat procedures for opposite side belt.

Note: Check to see that front and rear belts are tight and the chair is secure enough that it does not have any move- ment. Lock wheel- chair brakes.

Velcro™ N

Tabs

%HOW5HOHDVH Press lever clamp (lock) to release tension on belt.

O

Page 33