OPERATION
.QHHO0HFKDQLFDO2YHUULGH
In the event the Rampvan is in the kneeled position and you experi- ence a kneel system failure, use the electrical override feature to raise the rear of the vehicle if possi- ble. If the kneel system cannot be released using the electrical over- ride, follow the kneel mechanical override procedures outlined here.
Note: Although the mechanical override feature is available to raise the rear vehicle, mechani- cal (manual) procedures cannot EHDFFRPSOLVKHGUDSLGO\. Avoid driving the Rampvan and have the kneel system repaired immediately.
The kneel actuator assembly is located under the third row seat (driver side). A metal cover protects the kneel assembly. The motor end of the electric actuator is visible in the access hole pro-
YLGHGLQWKHÁRRUPRXQWHGFRYHU
Kneel Motor Release Nut
Front
Use the wrench provided with the Rampvan to turn the release nut (release kneel system). Turn the wrench as shown (toward front of vehicle).
Use the Kneel Mechanical Over- rideRQO\if the vehicle will not raise electrically. Ensure the Kneel On/Off switch is Off until a service technician checks the suspension system.
The kneel mechanical override fea- ture allows the rear of the vehicle to be raised to the normal position.
Rear
Kneel System Cover
Page 18