ENGLISH 5
Preparing the Massage Jet for use
Mounting the base unit to the wall
C 1 Mount the base unit to the wall, using
2 screws (3.5x30mm) and 2 wall plugs (S5) (not included).
To drill the holes in the right places, you can use the drilling stencil on the last page of these directions for use.
Do not allow the base unit to come into contact with water.
2Push excess mains cord into the storage space in the back of the base unit.
Using the Massage Jet
C
C
When you use the Massage Jet for the first time or when you have not been using it for a couple of days:
1Click the jet tip onto the appliance.
2Remove the water reservoir from the base unit.