Harmar Mobility CPL600, CPL1400, CPL1000, CPL400, CPL1200, CPL800 manual Safety

Page 18

18

Congratulations on the purchase of your Harmar Vertical Platform Lift. This lift has been engineered to provide trouble free service for many, many years. Please read this manual completely before operating your lift.

Safety

Do not exceed the maximum payload capacity of 750 lbs.

Do not ride on the lift until it is anchored in place.

This product is designed only for lifting people and wheel chairs. Do not use it for any other purpose.

Make sure any obstructions are cleared from underneath the platform area before use.

Make sure both the passenger and wheelchair are completely on to the platform before using.

Do not disable any safety equipment or switches supplied with this lift.

Do not attempt to service the lift yourself. Contact your Harmar dealer for assistance.

Do not allow children to operate or play around the lift.

Read all instructions in this manual before installing or operation the lift.

Image 18
Contents G H L a N D E R Table of Contents Using the ManualWhen You Receive the Lift SpecificationsSafety Required tools Code RequirementsSite Requirements Required materialsPreparing to Install the Lift Controller Harness ConnectionsInstalling the Platform StepInstalling the Outer Guard Panels Installing Fixed RampInstalling Auto-folding Ramp optional Anchoring the Lift Setting the Limit Switches Verifying Operation of the Lift Manual Override Call-Sends optionalTop Landing Gate optional EMI and Flush Strike Interlocks optional Flush Strike InterlockEMI Interlock Platform Gate optional Fascia Panel optional Commercial Platform Lift Owners Section Read the manual thoroughly before operating the liftSafety Down ControlsEmergency Stop Keylock optionalOperating the Lift Down How did you hear about Harmar? Purchased my Harmar lift becausePlease rate your satisfaction with your Harmar dealer