Harmar Mobility CPL1400, CPL600, CPL1000, CPL400 Controls, Emergency Stop, Down, Keylock optional

Page 19

19

Controls

Emergency Stop

In an emergency push this red button to stop the lift. Turn the button clockwise to run.

Up

Controls upward movement of lift platform. To move platform up, depress and hold the upper half of the rocker switch. To cease movement, release switch.

Down

Controls downward movement of lift platform. To move platform down, depress and hold the lower half of the rocker switch. To cease movement, release switch.

Keylock (optional)

Disables controls from operating when keylock is turned off.

Image 19

Contents G H L a N D E R Using the Manual Table of ContentsSpecifications When You Receive the LiftSafety Required materials Code RequirementsSite Requirements Required toolsController Harness Connections Preparing to Install the LiftStep Installing the PlatformInstalling Fixed Ramp Installing the Outer Guard PanelsInstalling Auto-folding Ramp optional Anchoring the Lift Setting the Limit Switches Verifying Operation of the Lift Call-Sends optional Manual OverrideTop Landing Gate optional Flush Strike Interlock EMI and Flush Strike Interlocks optionalEMI Interlock Platform Gate optional Fascia Panel optional Read the manual thoroughly before operating the lift Commercial Platform Lift Owners SectionSafety Keylock optional ControlsEmergency Stop DownOperating the Lift Down Purchased my Harmar lift because How did you hear about Harmar?Please rate your satisfaction with your Harmar dealer