Harmar Mobility CPL400, CPL600, CPL1400, CPL1000, CPL1200, CPL800 manual Down

Page 21

21

Step 1 - Down

Drive onto and stop in the middle of the platform. Apply the brakes of your chair or scooter.

Step 2

Verify that the emergency stop button is not activated by giving it a quick turn clockwise.

Step 3

Press and hold the DOWN rocker. The lift will move in the down direction and stop when it reaches the lower landing.

Warning: Always verify the lift’s access ramp unfolds fully and rests on the ground. If not contact your Harmar Dealer for assistance.

Step 4

Release the brakes on your chair or scooter and drive off the platform.

Image 21

Contents G H L a N D E R Using the Manual Table of ContentsWhen You Receive the Lift SpecificationsSafety Site Requirements Code RequirementsRequired tools Required materialsController Harness Connections Preparing to Install the LiftStep Installing the PlatformInstalling Fixed Ramp Installing the Outer Guard PanelsInstalling Auto-folding Ramp optional Anchoring the Lift Setting the Limit Switches Verifying Operation of the Lift Call-Sends optional Manual OverrideTop Landing Gate optional EMI and Flush Strike Interlocks optional Flush Strike InterlockEMI Interlock Platform Gate optional Fascia Panel optional Read the manual thoroughly before operating the lift Commercial Platform Lift Owners SectionSafety Emergency Stop ControlsDown Keylock optionalOperating the Lift Down How did you hear about Harmar? Purchased my Harmar lift becausePlease rate your satisfaction with your Harmar dealer