7
Installing the Outer Guard Panels
Step 1
Remove the hexbolts on the corners of the platform. Insert the guard panel posts into the pockets in the platform. The smooth side of the guard panels should face in towards the center of the platform.
Step 3
Plug in the harness for the platform control box. Secure the harnesses under the clip on top of the carriage flange.
If you have a 90 degree exit platform, install the end guard panel using the provided bracket and bolt to inner guard panel.
Step 2
Install the platform control box on the rear guard panel using screws and nuts through the panel.
Installing Fixed Ramp
Step 1
•Position the ramp after the lift is in its final location.
•Maintain a gap of 3/8” to 3/4” between the ramp and platform.
•Drill a pilot hole into the concrete and fasten using supplied concrete lags through ramp flanges.