Harmar Mobility CPL1000, CPL600, CPL1400, CPL400, CPL1200, CPL800 manual Operating the Lift, Step

Page 20

20

Operating the Lift

Step 1 - Up

Drive onto and stop in the middle of the platform. Apply the brakes of your chair or scooter.

Step 2

Verify that the emergency stop button is not activated by giving it a quick turn clockwies.

Step 3

Press and hold the UP rocker. The lift will move in the up direction and stop when it reaches the upper landing.

Warning: Always verify the lift’s platform has stopped level with the upper landing. If not contact your Harmar Dealer for assistance.

Step 4

Release the brakes on your chair or scooter and drive off the platform.

Image 20

Contents G H L a N D E R Table of Contents Using the ManualSafety When You Receive the LiftSpecifications Code Requirements Site RequirementsRequired tools Required materialsPreparing to Install the Lift Controller Harness ConnectionsInstalling the Platform StepInstalling the Outer Guard Panels Installing Fixed RampInstalling Auto-folding Ramp optional Anchoring the Lift Setting the Limit Switches Verifying Operation of the Lift Manual Override Call-Sends optionalTop Landing Gate optional EMI Interlock EMI and Flush Strike Interlocks optionalFlush Strike Interlock Platform Gate optional Fascia Panel optional Commercial Platform Lift Owners Section Read the manual thoroughly before operating the liftSafety Controls Emergency StopDown Keylock optionalOperating the Lift Down Please rate your satisfaction with your Harmar dealer How did you hear about Harmar?Purchased my Harmar lift because