Graham Field US0458, US0208PL user manual SPECIFICATIONS, ALL Models

Page 17

5 SPECIFICATIONS, ALL MODELS *

* Specifications are subject to change without notice.

Deck	High position
height
		Deck height: High Position
	US0208 / US0208PL:	US0458 / US0458PL with cast-	US0458 / US0458PL with
	24.0 inches	ers in low position: 20.0 inches	casters in standard position:
			23.5 inches
	Low position
		Deck height: Low Position
	US0208 / US0208PL:	US0458 / US0458PL with cast-	US0458 / US0458PL with
	15.0 inches	ers in low position: 9.5 inches	casters in standard position:
			13 inches
Bed length		Bed Length
Info: To extend grid length (80
in.) to 84 in., install optional kit
690-0084-000
(all beds).
	All models: 87.0 inches
Deck width		Deck Width

	All models: 36.0 inches
Weight *	Normal operating conditions	450 lb, evenly distributed including mattress, accessories, rails, etc.

	* Maximum patient weight	350 lb
Construction	Frame	10 ga (.135) high strength, low alloy steel (roll formed)

	Sleeping surface	11 ga (.120) cold rolled steel

Finish	5 stage bath	1.	S21F acid bath (cleans grease and oil from metal).
		2.	Fresh water rinse.

		3.	QuiliPhos 20 phosphate coat (inhibits rust and helps maintain
		electrical charge during powder application).
		4.	Fresh water rinse.

		5.	QuiliRinse 404 (seals metal for powder coating).

All parts are then coated with a colored epoxy powder and baked 35 minutes at 375 degrees F. The powder coating finish is approximately 2.5 mils thick. The coating is smooth, uniform finish without runs, wrinkles, or grit.

US0208-INS-LAB-RevD11 • Patriot Homecare Bed

17

Image 17

Contents US0208-INS-LAB-RevD11 Contents Safety Thermal Motor Protection GRAVITY-DOWN Feature for Head and Knee ElevationHead and Foot Assembly Assembly InstructionsRemove motor slide caps Motor AssemblyInstall Motors Problem Probable cause Fix Install motor slide capsMotor assembly troubleshooting Low bed height FULL-ELECTRIC BED only US0458 / US0458PL Caster PositionStandard conventional bed height All models Assemble bed foot end BED END AssemblyAll bed models Assemble bed head end All models Install bed end locking hardware US0208-INS-LAB-RevD11 Patriot Homecare Bed Unplug the power cord Full-electric bed only US0458 / US0458PL Assemble hi/lo rod HI/LO ROD Assembly / BED LengthSemi-electric bed only US0208 / US0208PL Assemble hi/lo rod Foot END All models Attach hi/lo rod to gearbox or motor shaft pinsPendant Hand Control Operation BED OperationSemi-electric bed only US0208 / US0208PL Full-electric bed only US0458 / US0458PLCrank Operation SEMI-ELECTRIC BED only US0208 / US0208PL SPECIFICATIONS, ALL Models BED Rail Safety Accessories BED RailsLumex Patriot Liberty BED Rails GF6500B-1 Assist BarGF6570B-1 Full Length Rail GF6580B-1 Quarter RailGF6590B-1 Half No-Gap Head Rail LX5088 No-Gap Bed Rail Lumex Universal BED RailsGF6570A-1 Full Length Side Rail Info Suggested rail-to-headboard minimum is 9.25 inches GF6580A-1 Low Universal Half RailPart number Description Semi-electric Full-electric Service PARTS, ALL ModelsBED Components BED END Components Part number Description BED Service PartsMaintenance and Safety Checks Warranty Index Northeast Parkway Atlanta, Georgia 30360 telephone