Graham Field US0458, US0208PL user manual Assembly Instructions, Head and Foot Assembly

Page 5

3 ASSEMBLY INSTRUCTIONS

HEAD AND FOOT ASSEMBLY

foot

section

hook	rivet
	motor cam	head
		section

hookrivet

Assembly, head and foot sections

Note: Grid deck not shown for clarity

1.Place the head and foot sections on their sides at approximately right angles to each other with motor cams up, as shown above.

2.Slide the head and foot sections together until the foot section’s hook catches the head sec- tion’s rivet on both sides. Ensure both rivets are completely seated before continuing.

linkage plate

foot

head wing

head

Straighten sections

Note: Grid deck not shown for clarity

3.With the rivets fully seated in the hooks as described in step 2, rotate and straighten the bed as shown above. Position head wing as shown above.

sNOTICE: While balancing the frame, do not elevate the knee too far or the linkage may over- extend and lock. If the linkage locks, manually push the large linkage plate toward the foot of the bed.

US0208-INS-LAB-RevD11 • Patriot Homecare Bed

5

Image 5

Contents US0208-INS-LAB-RevD11 Contents Safety Thermal Motor Protection GRAVITY-DOWN Feature for Head and Knee ElevationHead and Foot Assembly Assembly InstructionsRemove motor slide caps Motor AssemblyInstall Motors Problem Probable cause Fix Install motor slide capsMotor assembly troubleshooting Low bed height FULL-ELECTRIC BED only US0458 / US0458PL Caster PositionStandard conventional bed height All models Assemble bed foot end BED END AssemblyAll bed models Assemble bed head end All models Install bed end locking hardware US0208-INS-LAB-RevD11 Patriot Homecare Bed Unplug the power cord Full-electric bed only US0458 / US0458PL Assemble hi/lo rod HI/LO ROD Assembly / BED LengthSemi-electric bed only US0208 / US0208PL Assemble hi/lo rod Foot END All models Attach hi/lo rod to gearbox or motor shaft pinsPendant Hand Control Operation BED OperationSemi-electric bed only US0208 / US0208PL Full-electric bed only US0458 / US0458PLCrank Operation SEMI-ELECTRIC BED only US0208 / US0208PL SPECIFICATIONS, ALL Models BED Rail Safety Accessories BED RailsLumex Patriot Liberty BED Rails GF6500B-1 Assist BarGF6570B-1 Full Length Rail GF6580B-1 Quarter RailGF6590B-1 Half No-Gap Head Rail LX5088 No-Gap Bed Rail Lumex Universal BED RailsGF6570A-1 Full Length Side Rail Info Suggested rail-to-headboard minimum is 9.25 inches GF6580A-1 Low Universal Half RailPart number Description Semi-electric Full-electric Service PARTS, ALL ModelsBED Components BED END Components Part number Description BED Service PartsMaintenance and Safety Checks Warranty Index Northeast Parkway Atlanta, Georgia 30360 telephone