Graham Field US0208 Thermal Motor Protection, GRAVITY-DOWN Feature for Head and Knee Elevation

Page 4

2 INTRODUCTION, PATRIOT HOMECARE BED USER MANUAL

This manual contains assembly and maintenance instructions for your Model US0208 / US0208PL Semi-Electric and US0458 / US0458PL Full-Electric / Low Patriot bed. Read the entire manual care- fully before using your bed, and refer to it during use if you have questions.

THERMAL MOTOR PROTECTION

This product is powered by a quiet, efficient DC motor system. When the bed is plugged into a power outlet, the electrical transformer is always energized in a stand-by condition. The Okimat actuator casing may feel warm to the touch even when the bed is not being used; this is a normal condition.

Thermal protection activation (protection against overheating caused by excessive or extended periods of operation), which causes the bed to shut down operation when overheated, is a safety feature of this product.

Causes of thermal protection activation include multiple or repeated adjustment of long duration, or the use of multiple functions at one time. To ensure trouble-free operation, always allow a slight pause between multiple adjustments, and avoid operating more than one function at a time. If thermal protection activation occurs, the bed pendant hand control will not function. The thermal protection will reset after a period of time dependent on the severity of the overheating. To short- en the reset time, temporarily unplug the power cord from the power outlet.

GRAVITY-DOWN FEATURE FOR HEAD AND KNEE ELEVATION

Patriot beds are equipped with a gravity-down safety feature. The motors push the head and knee grid decks up, but do not pull the knee and head down. As the motor plunger retracts, the head and knee lower freely, minimizing bed damage and/or personal injury from items caught under the grid deck.

Info: When using telescoping deck-mount bed rails, the head and knee may not lower without weight on the bed.

US0208-INS-LAB-RevD11 • Patriot Homecare Bed

4

Image 4
Contents US0208-INS-LAB-RevD11 Contents Safety GRAVITY-DOWN Feature for Head and Knee Elevation Thermal Motor ProtectionAssembly Instructions Head and Foot AssemblyInstall Motors Motor AssemblyRemove motor slide caps Motor assembly troubleshooting Install motor slide capsProblem Probable cause Fix Standard conventional bed height FULL-ELECTRIC BED only US0458 / US0458PL Caster PositionLow bed height All bed models Assemble bed head end BED END AssemblyAll models Assemble bed foot end All models Install bed end locking hardware US0208-INS-LAB-RevD11 Patriot Homecare Bed Unplug the power cord Semi-electric bed only US0208 / US0208PL Assemble hi/lo rod HI/LO ROD Assembly / BED LengthFull-electric bed only US0458 / US0458PL Assemble hi/lo rod All models Attach hi/lo rod to gearbox or motor shaft pins Foot ENDBED Operation Pendant Hand Control OperationSemi-electric bed only US0208 / US0208PL Full-electric bed only US0458 / US0458PLCrank Operation SEMI-ELECTRIC BED only US0208 / US0208PL SPECIFICATIONS, ALL Models Accessories BED Rails BED Rail SafetyLumex Patriot Liberty BED Rails GF6500B-1 Assist BarGF6590B-1 Half No-Gap Head Rail GF6580B-1 Quarter RailGF6570B-1 Full Length Rail GF6570A-1 Full Length Side Rail Lumex Universal BED RailsLX5088 No-Gap Bed Rail GF6580A-1 Low Universal Half Rail Info Suggested rail-to-headboard minimum is 9.25 inchesBED Components Service PARTS, ALL ModelsPart number Description Semi-electric Full-electric BED END Components BED Service Parts Part number DescriptionMaintenance and Safety Checks Warranty Index Northeast Parkway Atlanta, Georgia 30360 telephone