Graham Field US0208PL, US0458 user manual BED END Assembly, All bed models Assemble bed head end

Page 9

BED END ASSEMBLY

All bed models: Assemble bed head end

1.Insert one locking and one non-locking caster into bed end. Locking casters must be installed diagonally from each other. See previous page for full-electric caster position options.

2.Standing directly in front of the bed end, position it as close to the bed as possible.

3.With one hand, reach over end and lift up the bed.

bed head end

frame (head)

Attach bed head end

4. Tilt the bed end slightly back toward you as shown above.

rivet

lock

Engage lower rivet

Lower bed onto lock

5.Engage lower rivet slightly with corner lock and tilt end toward bed as shown at above left.

6.Lower bed onto corner lock as shown at above right.

All models: Assemble bed foot end

After bed head end has been attached, perform steps 1-6 in All models: Assemble bed head end above to install the foot end.

US0208-INS-LAB-RevD11 • Patriot Homecare Bed

9

Image 9
Contents US0208-INS-LAB-RevD11 Contents Safety Thermal Motor Protection GRAVITY-DOWN Feature for Head and Knee ElevationHead and Foot Assembly Assembly InstructionsMotor Assembly Install MotorsRemove motor slide caps Install motor slide caps Motor assembly troubleshootingProblem Probable cause Fix FULL-ELECTRIC BED only US0458 / US0458PL Caster Position Standard conventional bed heightLow bed height BED END Assembly All bed models Assemble bed head endAll models Assemble bed foot end All models Install bed end locking hardware US0208-INS-LAB-RevD11 Patriot Homecare Bed Unplug the power cord HI/LO ROD Assembly / BED Length Semi-electric bed only US0208 / US0208PL Assemble hi/lo rodFull-electric bed only US0458 / US0458PL Assemble hi/lo rod Foot END All models Attach hi/lo rod to gearbox or motor shaft pinsPendant Hand Control Operation BED OperationSemi-electric bed only US0208 / US0208PL Full-electric bed only US0458 / US0458PLCrank Operation SEMI-ELECTRIC BED only US0208 / US0208PL SPECIFICATIONS, ALL Models BED Rail Safety Accessories BED RailsLumex Patriot Liberty BED Rails GF6500B-1 Assist BarGF6580B-1 Quarter Rail GF6590B-1 Half No-Gap Head RailGF6570B-1 Full Length Rail Lumex Universal BED Rails GF6570A-1 Full Length Side RailLX5088 No-Gap Bed Rail Info Suggested rail-to-headboard minimum is 9.25 inches GF6580A-1 Low Universal Half RailService PARTS, ALL Models BED ComponentsPart number Description Semi-electric Full-electric BED END Components Part number Description BED Service PartsMaintenance and Safety Checks Warranty Index Northeast Parkway Atlanta, Georgia 30360 telephone