Genie TZ-50 manual Setup for Function Tests

Operator's Manual Second Edition • First Printing

Function Tests

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1 Avoid hazardous situations.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

Know and understand the function tests before going on to the next section.

4 Inspect the workplace.

5 Only use the machine as it was intended.

Fundamentals

The function tests are designed to discover any malfunctions before the machine is put into service. The operator must follow the step-by-step instructions to test all machine functions.

A malfunctioning machine must never be used. If malfunctions are discovered, the machine must be tagged and removed from service. Repairs to the machine may only be made by a qualified service technician, according to the manufacturer's specifications.

After repairs are completed, the operator must perform a pre-operation inspection and function tests again before putting the machine into service.

Setup for Function Tests

1Position the machine on a firm, level surface.

2Set the parking brake.

3Disconnect the trailer lights, safety chains and brake cables from the vehicle.

4Open the latch on the ball coupler.

5Pull the jack release handle and rotate the tongue jack to the lifting position.

6Raise the tongue by turning the jack handle.

7Be sure the boom hold-down latches are unlatched.

8Be sure the batteries are connected.

16 Genie TZ-50 Part No. 114164