Genie TZ-50 manual Damaged Machine Hazards, Bodily Injury Hazard, Towing Hazards

Page 7

Second Edition • First Printing

Operator's Manual

 

 

 

 

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Conduct a thorough pre-operation inspection of the machine and test all functions before each work shift. Immediately tag and remove from service a damaged or malfunctioning machine.

Be sure all maintenance has been performed as specified in this manual and the appropriate service manual.

Be sure all decals are in place and legible.

Be sure the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil or air leak. An air leak or hydraulic leak can penetrate and/or burn skin.

Models with engines: When the engine is running, operate the machine in a well-ventilated area to avoid carbon monoxide poisoning.

Improper contact with components under any cover will cause serious injury. Only trained maintenance personnel should access compartments. Access by the operator is only advised when performing a pre-operation inspection. All compartments must remain closed and secured during operation.

SAFETY RULES

Towing Hazards

Read, understand and obey all of your tow vehicle manufacturer’s recommendations, warnings and instructions before towing this machine.

Make sure your tow vehicle is properly maintained and capable of towing this machine.

Be sure the hitch is properly and securely attached to your tow vehicle.

Do not overload your tow vehicle. Observe the manufacturer’s Gross Vehicle Weight Rating (GVWR).

Be sure all lights, mirrors and hitch components conform to federal and local regulations.

Be sure that all driving lights are operational.

Be sure the tires are properly inflated.

Do not tow the machine unless the boom is lowered into the chassis cradle and the hold-down latch is securely locked in place.

Do not load cargo on the machine. The TZ is not designed to carry any extra cargo.

Be sure the safety chains (if required) are securely attached to the tow vehicle. Cross the chains under the hitch. This will create a cradle to catch the tongue of the trailer if it becomes disconnected from the tow vehicle.

Do not tow the machine on public roads unless it meets all governmental regulations for towing.

Do not exceed 60 mph / 97 km/h. Obey all local and national towing speed laws.

Be sure to chock the wheels of the trailer when parking on a hill.

Part No. 114164

Genie TZ-50

5

Image 7
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety Rules Tip-over Hazards Electrocution HazardsMaximum allowable manual force CE and Australia 400 N Component Damage Hazards Fall HazardsCollision Hazards Explosion and Fire HazardsBodily Injury Hazard Damaged Machine HazardsTowing Hazards Decal Legend Optional Drive System Safety Tip-over HazardsLifting Hazard Battery Safety Burn HazardsExplosion Hazards Tip-over HazardGround Control Panel ControlsPlatform Control Panel StopDrive Control Panel Option StopFundamentals Pre-operation InspectionPre-operation Inspection Check the Batteries MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Hydraulic Oil Level Check the Tires and WheelsCheck the Engine Oil Level if equipped Scheduled MaintenanceFunction Tests Setup for Function TestsTest Emergency Stop Test Boom Functions and Function EnableTest the Parking Brake At the Ground ControlsTest Outrigger Interlock At the Platform ControlsTest the Tilt Sensor Test Drive and Brake System if equipped Workplace Inspection Workplace InspectionEmergency Stop Operating InstructionsOnly use the machine as it was intended Starting the Engine if equipped Setup for OperationOperation from Ground Operation from PlatformManual Operation of Jib Australian models only Manual Operation of FunctionsAll models except Australia Australian models onlyFall Protection Platform Overload Indicator Light if equippedOptional Drive System Operation To determine the slope grade Driving on a slopeTowing After Each UseStorage Moving Machine Without a Tow VehicleTowing Information Charging the Batteries with the Engine Battery Charging Instructions Observe and ObeyCharging the Batteries with the AC Charger Transport and Lifting Instructions Securing the Chassis Securing to Truck or Trailer for TransitCenter of Gravity Table Lifting InstructionsAxis Chassis Lifting Points Inspection for Decals with Words DecalsPlatform End Ground Controls SideInspection for Decals with Symbols Ground Controls Side Power source SpecificationsRange of Motion Chart Reporting Safety Defects Reporting Safety DefectsGenie Industries PO Box Redmond, WA Before Driving Before Towing