Second Edition • First Printing | Operator's Manual |
|
|
|
|
Manual Operation of Functions
Manifold valves are located under the cover on the ground controls side of the machine.
Machine functions can be operated with the hand pump located on the manifold.
Turntable Rotate
Secondary Boom Down
Primary Boom Down
Primary Boom Up
Primary Boom
Extend/Retract
All models except Australia:
1Open the valve of the desired function.
Turntable rotate right: Push in and hold.
Turntable rotate left: Pull out and hold.
Platform extend: Push in and hold.
Platform retract: Pull out and hold.
Secondary boom down and primary boom up/down: Push in and turn counterclockwise until the button pops into place.
2Operate the hand pump.
3Reset the valve. The machine will not function unless the valves are reset.
Turntable rotate and platform extend/retract: Let go.
Secondary boom down and primary boom up/ down: Push in and turn clockwise until the button pops into place.
OPERATING INSTRUCTIONS
Australian models only:
1Open the valve of the desired function.
Turntable rotate right: Push in and turn clockwise.
Turntable rotate left: Pull out and turn counterclockwise.
Platform extend: Push in and turn clockwise.
Platform retract: Pull out and turn counterclockwise.
Secondary boom down, primary boom up/ down: Push in and turn counterclockwise.
2Operate the hand pump.
3Reset the valve. The machine will not function unless the valves are reset.
Turntable rotate right: Turn counterclockwise.
Turntable rotate left: Turn clockwise.
Platform extend: Turn counterclockwise.
Platform retract: Turn clockwise.
Secondary boom down and primary boom up/ down: Push in and turn clockwise.
Manual Operation of Jib (Australian models only)
The jib boom lowering manifold is located on the primary extension boom.
1Turn the jib manifold knob counterclockwise to lower the jib.
2To reset, turn the knob clockwise as far as it will go.
Jib manifold knob
Part No. 114164 | Genie | 23 |